Do you have a question about the KTM 790 Adventure 2020 and is the answer not in the manual?
Displacement | 799 cc |
---|---|
Bore x Stroke | 88 mm x 65.7 mm |
Compression Ratio | 12.7:1 |
Transmission | 6-speed |
Ground Clearance | 233 mm |
Dry Weight | 189 kg |
Rear Brake | 260 mm disc, 2-piston caliper |
Front Tire | 90/90-21 |
Rear Tire | 150/70-18 |
Engine Type | 2-cylinder, 4-stroke, parallel twin |
Power | 70 kW (95 hp) @ 8, 000 rpm |
Torque | 88 Nm @ 6, 600 rpm |
Fuel System | Electronic fuel injection |
Fuel Tank Capacity | 20 liters |
Seat Height | 850 mm |
Wet Weight | 209 kg |
Front Suspension | WP-USD Ø 43 mm |
Front Brake | 2 x 320 mm discs, 4-piston calipers |
ABS | Bosch 9.1 MP (with cornering ABS and offroad mode) |
Rear Suspension | WP shock absorber with preload adjustment |
Explains the meaning of various symbols used in the manual for clarity and understanding.
Explains the typographical formats used for names and terms, such as proprietary names and brands.
Details the process of enabling vehicle electronics after transport, ensuring proper initial setup.
Locates the diagnostics connector and explains its use with diagnostic tools.
Provides step-by-step instructions for unpacking the motorcycle and performing initial setup procedures.
Procedures for removing and mounting the passenger and rider seats of the motorcycle.
Instructions for accessing and managing side covers and storage compartments on the motorcycle.
Steps for removing, installing, and charging the motorcycle's 12-V battery.
Procedures for safely disconnecting and connecting the 12-V battery terminals.
Guide to checking/adjusting headlights and the refueling process, including safety.
Steps for opening and closing the fuel tank filler cap, including key usage.
Comprehensive list of torque specifications for chassis components, essential for correct assembly and maintenance.
Details specifications and guidelines for using super unleaded fuel, including ethanol content limitations.