2 SETUP
10
F02140-10
–
Mount screws
ck
, but do not tighten yet.
Guideline
Screw, engine guard M6x8 8 Nm (5.9 lbf ft)
F02141-10
–
Mount screws
cl
, but do not tighten yet.
Guideline
Screw, fuel tank
cover
M6x12 8 Nm (5.9 lbf ft)
The engine guard is directed evenly toward the front.
– Tighten all the screws of the engine guard.
Guideline
Screw, engine
guard
M6x8 8 Nm (5.9 lbf ft)
Screw, engine
guard
M6x10 10 Nm (7.4 lbf ft)
Loctite
®
243™
Screw, fuel tank
cover
M6x12 8 Nm (5.9 lbf ft)
F02142-10
–
Mount hose
cm
with the angle piece.
(890 ADVENTURE R RALLY)
– Remove main silencer. ( p. 17)
– Install the main silencer. ( p. 17)
Info
The vehicle is assembled in the factory with the
original main silencer.
An accessory main silencer is also included in the
scope of supply.
Assemble the vehicle according to the customer's
requirements and point out legal regulations, e.g.
entry in the vehicle documents if necessary.
F02143-01
– Remove the seat. ( p. 12)
– Remove spare key and KEYCODECARD from under the seat and
keep in a safe place for the handover.
– Charge the 12-V battery. ( p. 20)
To Next Page
Loading...
