KTM 890 ADVENTURE R 2021 User Manual

SETUP 2
3
2.1 Transport mode
H02713-01
This vehicle was blocked for transport in the software.
To operate the vehicle, the vehicle electronics must be enabled.
This process is conducted during initial setup in KTM Dealer.net.
Enabling ensures that the initial setup in KTM Dealer.net is docu-
mented.
Enabling can be performed either temporarily, e.g. for a test ride,
or permanently for vehicle handover.
Info
Make sure that the vehicle is permanently enabled before
handing it over to the customer.
2.2 Diagnostics connector
F01981-10
Diagnostics connector
1
is located under the battery cover.
2.3 Unpacking and setting up the vehicle
F01037-10
– Remove the straps and the box.
F02148-01
– Remove the adhesive tape in the upper area of the motorcycle.

KTM 890 ADVENTURE R 2021 Specifications

General

Engine Type	2-cylinder, 4-stroke, parallel twin
Displacement	889 cc
Transmission	6-speed
Fuel System	Electronic Fuel Injection
Seat Height	880 mm (34.6 in)
Rear Suspension	WP XPLOR PDS shock absorber
Compression Ratio	13.5:1
Final Drive	Chain
Power	77 kW (105 hp)
Torque	100 Nm
Fuel Tank Capacity	20 liters
Dry Weight	196 kg
Front Suspension	WP XPLOR USD
Front Brake	2 x 320 mm disc, 4-piston radial fixed caliper
Rear Brake	2-piston caliper, brake disc Ø 260 mm
ABS	Bosch 9.1 MP (Cornering ABS and offroad mode)
Frame	Chromium-Molybdenum-Steel frame using the engine as a stressed element, powder coated
Wheelbase	1, 528 mm