KTM 890 ADVENTURE R 2022 User Manual

2 SETUP
8
F02135-10
(EU)
–
Mount reflector
8
with rubber bushings
9
and tension
washers
bk
on the license plate holder
bl
.
– Position the license plate bracket on the license plate sup-
port.
–
Mount and tighten screws
bm
.
Guideline
Screw, license
plate holder
M5 5 Nm (3.7 lbf ft)
Loctite
®
243™
– Carefully loosen and remove the rear tension belt.
Info
An assistant prevents the motorcycle from falling over.
– Carefully loosen and remove the tension belts around the lower
triple clamp.
The vehicle is released at the front.
– Together with an assistant, take the vehicle off the pallet.
F02136-10
–
Mount rubber spacers
bn
on the retaining bracket
bo
.
–
Position retaining bracket
bo
on the engine guard.
–
Mount and tighten screws
bp
.
Guideline
Screw, engine
guard retaining
bracket
M6 10 Nm (7.4 lbf ft)
Loctite
®
243™

KTM 890 ADVENTURE R 2022 Specifications

General

Engine Type	2-cylinder, 4-stroke, parallel twin
Displacement	889 cc
Transmission	6-speed
Dry Weight	196 kg (432 lbs)
Front Suspension	WP XPLOR-USD, Ø 48 mm
Rear Suspension	WP XPLOR PDS shock absorber
Front Tire	90/90-21
Rear Tire	150/70-18
Fuel System	Electronic Fuel Injection
Compression Ratio	13.5:1
Final Drive	Chain
Traction Control	MTC (Motorcycle Traction Control)
Power	105 hp (77 kW) @ 8, 000 rpm
Torque	100 Nm
Fuel Tank Capacity	20 liters
Seat Height	880 mm
Front Brake	320 mm
Rear Brake	260 mm disc, 2-piston caliper
ABS	Cornering ABS
Wheelbase	1, 528 mm
Ride Modes	Street, Offroad, Rally
Frame	Chromium-Molybdenum-Steel frame using the engine as a stressed element, powder-coated
Ground Clearance	263 mm