KTR ROTEX GS Summarized Assembly Instructions

Summarized assembly instructions
ROTEX
®
GS
ZR3
KTR-N
Sheet:
Edition:
45524 EN
1 of 7
4
Please observe protection
note ISO 16016.
Drawn:
2017-03-15 Shg/Ki
Replacing:
KTR-N dated 2017-01-02
Verified:
2017-03-15 Shg
Replaced by:

These mounting instructions are a summary of KTR N 45510 comprising details about the as-
sembly/disassembly of the intermediate shaft coupling ROTEX
®
GS ZR3 only. Please refer to
the instructions KTR N 45510 for general advice as well as advice on safety and danger before
starting up the coupling. According to EU standard 2014/34/EU, legal claims for warranty can-
not be allowed.
ROTEX
®
GS
Torsionally flexible intermediate shaft coupling type ZR3
ROTEX
®
GS, ZR3
1 Technical data 2
2 Assembly 4
2.1 Components of the couplings 4
2.2 Assembly of type ZR3 5
2.3 Displacements - alignment of the couplings 5
2.4 Critical whirling speed 7
Table of contents

KTR ROTEX GS Specifications

General

Material (Hub)	Steel
Nominal Torque Range	2.5 Nm to 25, 000 Nm
Shaft Diameter	6 mm to 180 mm (depending on size)
Backlash	Zero Backlash
Compensation Capabilities	Angular, and Axial Misalignment