Kuat SWITCH 4 - Step 3: Tighten strap tensioner bolt; Step 4: Repeat for second rack and align; Using the SWITCH Rack; Step 1: Open ski racks

Using the SWITCH
TM
rack
1 Push end cap upward on each rack to release
and open SWITCH
TM
ski racks.
4 Repeat steps 2 - 3 for second SWITCH
TM
, being sure both
SWITCH
TM
racks are aligned with one another.
Always check that SWITCH racks are secure prior to travel.
Overtightening can damage crossbar and mount
3 Snug mounts to crossbar by tightening
the Strap Tensioner Bolt on the opposite
side of the Universal Mount using one of the
provided M5 Security Allen Wrenches.