Need help?Do you have a question about the Kuat NV BASE 2.0 and is the answer not in the manual?
General| Bike Capacity | 2 bikes |
|---|---|
| Weight Capacity | 60 lbs per bike |
| Rack Weight | 52 lbs |
| Material | Steel |
| Tilt Feature | Yes |
| Integrated Cable Locks | Yes |
| Adjustable Tire Cradles | Yes |
| Tire Width | Up to 4.8" |
| Foot Assist | Yes |
| Foldable | Yes |
| Tool-Free Assembly | Yes |
| Hitch Size | 2" |
| Max Wheelbase | 50 inches |
| Hitch Compatibility | 2" hitch receivers |
Align trays with center beam holes and secure using M8x160 bolts.
Mount the pivot lever onto the keyed shaft and fasten with a bolt and washer.
Rotate the tire hook outward by pressing the release button.
Set the bicycle on the rack and ratchet the tire hook down onto the front tire.
Adjust the front cradle's position to accommodate different bicycle frames.
Feed and tighten the rear tire strap through the ratchet mechanism for security.
Essential safety precautions and operational restrictions for correct rack usage.
To Next Page
