Kuat NV BASE 2.0 - Rack Assembly Steps; Install Rear End Cap

3
Included in the parts box:
6mm Allen Wrench
8mm Allen Wrench 4x M8 Nut
3x M8x160 Bolts
M8 Lock Washer
3x Keys
Bottle Opener
Key-chain
Rear End Cap
Pivot Lever
Hitch Pin and Lock
M8x45 Bolt
Rear End Cap
STEP 1. Insert rear end cap.
Part Needed:
2x Keys
Bottle Opener
Keychain
Hitch Pin and Lock