— 10 —
OPERATION
If desired, tether to a wall or piece of furniture by attaching a security cable to the Threaded
Security Bolt Socket on the bottom of the unit. Note that there are many types of installations,
the next two pages just show a couple of examples. Refer to the owner’s manual that came
with the Security Cable Kit.
u
TO ATTACH USING STANDARD
TETHER:
Bolt the eyelet of the cable into the
bottom of the unit using a TORX
Screwdriver.
v
Secure using the hardware included with
the Kit (not included).
Threaded Security Bolt Installation - Example 1
NOTE: Security cable/bolt/hardware not included.
To Next Page
Loading...
