KUBE SYSTEMS Kube Essentials - Page 9

— 7 —
— 6 —
OPERATION
Setting the Time (Continued)
y
Within 2 seconds, press the Set + and
– buttons to set the hour. Make sure
the correct AM/PM setting is also set.
Press the ALARM SET/OFF button and
the minute will blink.
V
Within 2 seconds, press the Set + and
– buttons to set your region’s Daylight
Savings Time (DST) zone. Press the
ALARM SET/OFF button and the
snooze repeat setting will blink.
W
Within 2 seconds, press the Set + and
– buttons to set the desired Snooze
setting. This setting will control how
many times the Snooze function can
be repeated. When done do not press
any button for 2 seconds and the clock
will be set.
U
Within 2 seconds, press the Set + and
– buttons to set the minutes. Press
the ALARM SET/OFF button and the
country will blink.