Kubota B3030 Workshop Manual

TO THE READER
This Workshop Manual tells the servicing personnel about the mechanism, servicing and
maintenance of the B1830, B2230, B2530 and B3030. It contains 4 parts: "Information", "General",
"Mechanism" and "Servicing".
 Information
This section primarily contains information below.
• Safety First
• Safety Decal
• Specification
• Dimension
 General
This section primarily contains information below.
• Engine Identification
• Model Identification
• General Precautions
• Maintenance Check List
• Check and Maintenance
• Special Tools
 Mechanism
This section contains information on the structure and the function of the unit. Before you continue
with the subsequent sections, make sure that you read this section.
Refer to the latest version of Workshop Manual (Code No. 9Y021-01870 / 9Y021-18200) for the
diesel engine / tractor mechanism that this workshop manual does not include.
 Servicing
This section primarily contains information below.
• Troubleshooting
• Servicing Specifications
• Tightening Torques
• Checking, Disassembling and Servicing
All illustrations, photographs and specifications contained in this manual are of the newest
information available at the time of publication.
KUBOTA reserves the right to change all information at any time without notice.
Since this manual includes many models, information or illustrations and photographs can show
more than one model.
January, 2007
© KUBOTA Corporation 2007
KiSC issued 05, 2012 A

Kubota B3030 Specifications

General

Engine Type	Diesel
Cylinders	3
Fuel Type	Diesel
Fuel Capacity	8.7 gallons
Drive	4WD
Hydraulic System Type	Open center
3-Point Hitch Category	Category I
Engine Power	30 hp
Transmission Type	Hydrostatic
Displacement	91.5 cu in
Number of Gears	3 ranges (HST)
Tire Size (Rear)	12.4-16
PTO Power	24 hp