Kubota D1503-M-E - Warning and Caution Labels; Care of Warning and Caution Labels

SAFE OPERATION6
ENGLISH
1. Keep warning and caution labels clean and free from obstructing material.
2. Clean warning and caution labels with soap and water, dry with a soft cloth.
3. Replace damaged or missing warning and caution labels with new labels from your local KUBOTA dealer.
4. If a component with warning and caution label(s) affixed is replaced with new part, make sure new label(s) is (are)
attached in the same location(s) as the replaced component.
5. Mount new warning and caution labels by applying on a clean dry surface and pressing any bubbles to outside edge.
12. WARNING AND CAUTION LABELS
Part No.19077-8724-1 or 16667-8724-1
(55mm in diameter) (37mm in diameter)
Part No.TA040-4957-1
Stay clear of engine
fan and fan belt
13. CARE OF WARNING AND CAUTION LABELS
1ABK0000132.book 6 ページ ２００４年２月１９日 木曜日 午前１０時３０分