Kubota G21 - Page 66

48
ENGLISH
쏋 Brake Pedal
To apply the brakes, depress the brake pedal.
(1) Brake pedal
쏋 Parking Brake Pedal
To apply the parking brake, depress the brake pedal
and the parking brake pedal simultaneously. Then
release the brake pedal while holding the parking
brake pedal down.
To release the parking brake, depress the brake pedal
and release slowly.
(1) Brake pedal (A) “PARKING”
(2) Parking brake pedal
NOTE:
¡ This machine is equipped with safety devices. If
you dismount from the seat and the parking brake
is not applied, the engine will stop automatically.
쏋 Seat
3
CAUTION
To avoid personal injury:
¡¡
¡¡
¡ Make sure that the seat is completely
secured after each adjustment.
¡¡
¡¡
¡ Do not allow any person other than the
operator to ride on the machine.
[G18]
The operator’s seat position can be adjusted forward
and backward by a 100mm range by pulling the seat
sliding lever.
(1) Seat sliding lever
[G21]
The operator’s seat position can be adjusted forward
and backward by a 102 mm range by pulling the seat
sliding lever.
Turn the weight adjust knob to achieve the optimum
suspension setting.
(1) Seat sliding lever (A)To decrease tension
(2) Weight adjust knob (B)To increase tension
[G18]
[G21]