Kubota GL6000-STD - Connecting Loads (Receptacle Output Model); Connecting Loads (AUS Model)

15CONNECTING THE LOAD
ENGLISH
B Connecting the Load (Receptacles output
Model)
WARNING
To avoid personal injury:
A Connect or disconnect the load to
the AC receptacle only when the
engine is stopped.
i) GL11000-USA
60Hz 120/240V
ii) GL7000-USA
60Hz 120/240V
1. Turn OFF the circuit breakers on the control panel.
[
2. Connect the load to the A.C. receptacles.
B Connecting the Load (AUS Model)
WARNING
To avoid personal injury:
A Connect or disconnect the load to
the AC receptacle only when the
engine is stopped.
i) GL9000-AUS
50Hz 240V
ii) GL6000-AUS
50Hz 240V
1. Turn OFF the circuit breakers on the control panel.
2. Connect the load to the A.C. receptacles.
(1) Circuit breaker (A) Receptacle
(B) Receptacle
(C) Receptacle
(D) Receptacle
(1) Circuit breaker