40 AUTOMATIC START/STOP UNIT (A S/S UNIT)
ENGLISH
AUTOMATIC START/STOP UNIT (A S/S UNIT)
To connect the machine to the A S/S UNIT the genera-
tor is equipped with the ectt on the left side panel of the
control panel.
To connect the exterior apparatus with the machine,
perform the following instructions;
1. Remove the terminal taps cover.
2. Connect the unit to the ectt with the wiring
harnesses, following the operator’s manual of the A
S/S unit.
3. To assemble the ttc, set the ttc.
For nomenclature and connection of terminal taps are
referred to the "WIRING DIAGRAMS" section. (See
page 41-50)
(1) Plate
(2) Exterior connection terminal taps (ectt)
(3) Terminal taps cover (ttc)
To Next Page
Loading...
