EasyManuals Logo
Home>Kubota>Portable Generator>GL6000-STD

Kubota GL6000-STD User Manual

Kubota GL6000-STD
62 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #51 background imageLoading...
Page #51 background image
39TROUBLESHOOTING
ENGLISH
B Engine
If you have any questions, contact your KUBOTA dealer.
Trouble Cause Countermeasure
Not started. Not turned or slow
turning.
Battery trouble. Replacement of battery.
Insufficient battery charge. Recharge battery.
Slow turning at cold circumstance due to
high viscosity of engine oil.
Fuse blown out (Slow blow fuse)
Replace engine oil to D5W40 or
D10W30 for cold.
Replace fuse.
Terminal cover open. Close terminal cover. Fix terminal cover
with panel lock bolts.
Normal turning,
but not started.
Fuel shortage. Refuel.
Fuel does not flow. Check fuel filter. If filter is dirty, replace.
Check fuel tank. Remove the settled
impurities or moisture.
Air and water are contained in fuel supply
line.
Check pipe and fastening clamp. If any
damage exists, replace or repair.
Relieve air.
Remove water inside of fuel tank and
filter.
Injection pipe is loosened. Re-tighten.
Engine starts but stops immediately. Engine oil shortage. Add engine oil to upper limit of gauge.
Rotation is irregular. Fuel shortage. Refuel.
Fuel does not flow. Check fuel filter. If filter is dirty, replace.
Check fuel tank. Remove the settled
impurities or moisture.
Air and water are contained in the fuel
supply line.
Check pipe and fastening clamp. If any
damage exists, replace it, or repair.
Relieve air.
Remove water inside of fuel tank and
filter.
Injection pipe is loosened. Re-tighten.
Engine suddenly stops. Fuel shortage. Refuel.
Insufficient engine oil. Fill oil.
Water temperature is too high.
Insufficient cooling water.
Loosened water pump belt.
Blockage of radiator.
Fill cooling water.
Adjust belt tension.
Clean.
Terminal cover open. Close terminal cover. Fix terminal cover
with panel lock bolts.
Insufficient output.
When loaded, rotation goes slow.
Choke of air cleaner element. Replace air cleaner element.
Choke of fuel system. Check.
Choke of fuel filter. Element cleaning.
Oil deterioration. Replace engine oil.
Overload. Refer to generator.
Coolant leaks out. Insufficient cooling water. Fill cooling water.
Loosened fan belt. Adjust belt tension.
Blockage of radiator. Clean.
Exhaust gas is bad. Choke of air cleaner element. Clean air cleaner element.
Engine oil is over filled. Remove oil to upper limit of gauge.
Fuel quality is bad. Replace fuel with good quality fuel.
Abnormal sound
Large vibration.
Crack of vibration-proof rubber. Replace.
Others. Check, repair.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kubota GL6000-STD and is the answer not in the manual?

Kubota GL6000-STD Specifications

General IconGeneral
BrandKubota
ModelGL6000-STD
CategoryPortable Generator
LanguageEnglish

Related product manuals