Why does the battery charge lamp light up when my Kubota Portable Generator is operating?
If the battery charge lamp illuminates while your Kubota Portable Generator is running, consider these possible causes: * **Loose or damaged fan belt:** Readjust the belt tension or replace the belt. * **Poor alternator terminal contact:** Connect the terminal tightly. * **Alternator problem:** Check the alternator.
What to do if my Kubota Portable Generator does not operate after connecting electrical equipment?
If your Kubota Portable Generator fails to operate after connecting electrical equipment, check the following: * **Circuit breaker:** Ensure the circuit breaker is turned “ON”. * **Output terminal and socket:** Reinstall if the contact is bad. * **Electrical equipment:** If there is a malfunction, request repair.
What does it mean if the oil pressure lamp lights on while operating my Kubota Portable Generator?
If the oil pressure lamp lights on during operation of your Kubota Portable Generator, it could indicate: * **Insufficient engine oil:** Add engine oil. * **Lubricating system issues:** Check the lubricating system. * **Faulty oil pressure sensor:** Replace the sensor. * **Faulty oil pressure sensor wiring:** Repair the wiring.
Why is the rotation of my Kubota Portable Generator irregular?
Irregular rotation in your Kubota Portable Generator can be caused by: * **Fuel shortage:** Refuel the generator. * **Fuel flow issues:** Check the fuel filter for dirt and replace if necessary. Also, inspect the fuel tank for settled impurities or moisture and remove them. * **Air or water in the fuel line:** Inspect the pipe and fastening clamp for any damage, and repair or replace if needed. * **Loose injection pipe:** Retighten the injection pipe.
What to do if my Kubota Portable Generator starts then immediately stops?
If your Kubota Portable Generator starts but stops immediately, it is likely due to an engine oil shortage. Add engine oil to the upper limit of the gauge.
Why is my Kubota Portable Generator's output insufficient, and the rotation slows down when loaded?
The insufficient output and slow rotation of your Kubota Portable Generator when loaded can be caused by: * **Clogged air cleaner element:** Replace the air cleaner element. * **Fuel system blockage:** Check the fuel system. * **Clogged fuel filter:** Clean the fuel filter element. * **Deteriorated oil:** Replace the engine oil. * **Overload:** Reduce the load on the generator.
How to fix a Kubota Portable Generator that turns but doesn't start?
If your Kubota Portable Generator turns normally but doesn't start, consider these potential causes: * **Fuel shortage:** Refuel the generator. * **Fuel flow issues:** Check the fuel filter for dirt and replace if necessary. Also, inspect the fuel tank for impurities or moisture and remove them. * **Air or water in the fuel line:** Check the pipe and clamps for damage, repair or replace if needed, relieve air, and remove water from the fuel tank and filter. * **Loose injection pipe:** Retighten the injection pipe. * **Blown fuse:** Replace the fuse between the solenoid input code and grounding, ensuring there are no issues with the solenoid's moving parts (10A).
What to do if my Kubota Portable Generator engine suddenly stops?
If your Kubota Portable Generator engine suddenly stops, it could be due to several reasons: * **Fuel shortage:** Refuel the generator. * **Insufficient engine oil:** Add more oil. * **Overheating:** The water temperature may be too high due to insufficient cooling water, a loosened water pump belt, or a radiator blockage. Fill the cooling water, adjust the belt tension, and clean the radiator. * **Broken belt:** Replace the belt. * **Defective alternator:** Replace the alternator.
General| Brand | Kubota |
|---|---|
| Model | J108-STD |
| Category | Portable Generator |
| Language | English |
Key safety instructions to read and follow before operating the generator.
Guidelines on wearing safety clothing, handling electrical components, and avoiding hazards.
Safe handling of fuel, lubricants, exhaust gases, rotating parts, and battery explosion hazards.
Instructions and warnings for connecting loads to standard and AUS model generators.
Essential daily checks for battery, oil, coolant, and fuel before starting.
Step-by-step guide for starting, warming up, and operating the generator.
Procedures for starting in cold weather and safely stopping the engine.
Identifies common generator problems, their causes, and countermeasures.
To Next Page
