9.3 Setting the auto shift sensitivity
(1) Auto shift sensitivity control
When operating in the auto shift mode
With
the auto shift sensitivity control, the engine rpm for automatic gear shift up/down can be preset. Make
readjustments according to the job in question for eco-friendly operation.
Operating Auto shift sensitivity control Remarks
Eco-friendly operation with traveling speed
priority
• Retract
the graph leftward with the “Mi-
nus (-)” switch.
Suited for light-duty work.
Operation with PTO shaft speed priority
• Extend the graph rightward with the “Plus
(+)” switch.
Suited for heavy-duty work such as harvest-
ing.
When operating in the manual operation of the road mode
Suppose
that the sensitivity level has been preset with the auto shift sensitivity control. If the ez-command center is
used for gear shift over the range gear shift (from A to E) in such a case, the selected main gear shift works in a
different way.
Operating Auto shift sensitivity control Remarks
Light-duty
• Retract
the graph leftward with the “Mi-
nus (-)” switch.
Shifted to the rev-up/slow-down levels by
skipping the traveling speed range.
Heavy-duty
• Extend the graph rightward with the “Plus
(+)” switch.
Rev-up or slowed down close to the current
traveling speed.
K-MONITOR MAIN MENU (PREMIUM AND PREMIUM KVT MODELS ONLY)
INTELLIPANEL
™
CONTROL
To Next Page
Loading...
Need help?
General
