Need help?Do you have a question about the Kubota M7131 and is the answer not in the manual?
Manual for specific tractor models.
Lists common abbreviations used in the manual.
Explains general safety and operational symbols.
Explains symbols related to engine operation and status.
Explains symbols related to vehicle functions and controls.
Explains symbols related to PTO operations and functions.
Explains symbols for hydraulic controls and functions.
Explains symbols for electrical functions and indicators.
Provides critical safety information and hazard definitions.
Essential checks and precautions before starting tractor operation.
Step-by-step instructions for starting the tractor engine.
Guidelines for safe operation of the tractor during work.
Instructions for using the optional instructional seat.
Critical warnings and precautions to ensure child safety around the tractor.
Specific safety measures for operating the tractor on sloped terrain.
Precautions for safely driving the tractor on public roads.
Procedure and safety measures for parking the tractor.
Safety guidelines for operating the Power Take-Off (PTO).
Safety instructions for using the 3-point hitch system.
General safety precautions for performing tractor maintenance.
Precautions for safely handling and servicing the tractor battery.
Guidelines for maintaining correct tire pressure and safe wheel mounting.
Warnings and precautions for handling high-pressure hydraulic fluid.
Safety guidelines for the high-pressure fuel system.
Safety measures when working with the tractor's electrical system.
Instructions for maintaining and replacing safety labels.
Essential checks and precautions before starting tractor operation.
Step-by-step instructions for starting the tractor engine.
Guidelines for safe operation of the tractor during work.
Instructions for using the optional instructional seat.
Critical warnings and precautions to ensure child safety around the tractor.
Specific safety measures for operating the tractor on sloped terrain.
Precautions for safely driving the tractor on public roads.
Procedure and safety measures for parking the tractor.
Safety guidelines for operating the Power Take-Off (PTO).
Safety instructions for using the 3-point hitch system.
General safety precautions for performing tractor maintenance.
Precautions for safely handling and servicing the tractor battery.
Warnings and precautions for handling high-pressure hydraulic fluid.
Safety precautions related to Diesel Particulate Filter and SCR muffler operations.
Information on identifying and understanding safety labels on the tractor.
Illustrations and part numbers for various safety labels.
Safety warnings related to the front suspension hydraulic system.
Safety warnings associated with PTO operation and equipment.
Safety warnings related to electrical hazards, particularly high voltage.
Comprehensive safety warnings for tractor operation and handling.
Specific warnings about electrical safety, particularly with power lines.
Instructions for maintaining and replacing safety labels.
Details about the tractor's limited express warranty.
Procedure for safely removing the tractor from service.
Locations of identification plates for tractor serial numbers.
Technical specifications for tractor models M7131, M7151, M7171.
Details on transmission, clutch, steering, and braking systems.
Specifications for the tractor's hydraulic system and components.
Specifications related to the Power Take-Off (PTO) system.
Table of traveling speeds for Standard, Premium, and Premium KVT models.
Limits on implement weight, drawbar load, and lifting capacity.
Load capacities for trailers with different hitch types and tractor configurations.
Diagrams illustrating different hitch types and their load limits.
Specifications and torque values for installing a front loader.
Critical safety instructions for operating front loaders.
Overview of the tractor's instrument panel and controls with page references.
Explanation of gauges, indicators, and the liquid crystal display.
Identification and page references for foot and hand controls.
Detailed explanation of joystick functions for the standard model.
Identification of controls in the operator's cabin for the premium model.
Detailed explanation of joystick functions for the premium model.
Identification of controls in the operator's cabin for the premium KVT model.
Detailed explanation of joystick functions for the premium KVT model.
Identification of external switches and connector ports.
Introduction to the K-monitor system and its components.
Explanation of information displayed on the tractor's LCD screen.
Details on various displays like Max speed, Cruise, and gauges.
Procedure for initial setup, including clock and implement settings.
Steps to set the tractor's clock time.
How to enable or disable the clock display.
Procedure to set the working range for implements.
Configuration of automatic gear shifting modes for road and field.
How to use the distance measurement function.
Steps for starting, resetting, and interrupting distance measurement.
Data display options for basic and performance monitoring.
Details on data displayed on the basic information monitor.
Details on data displayed on the performance monitor.
How to select different screens for performance monitoring.
How to change the displayed data on the basic information monitor.
How to customize the data shown on the performance monitor.
Explanation of the screen selector switch.
Explanation of the tractor's indicators and their color meanings.
Overview of K-MONITOR functions for settings and operations.
Identification of K-MONITOR parts and their functions.
How to display and switch between main menus on the K-MONITOR.
Procedure for accessing and switching to sub-display screens.
Fundamental operations for changing settings on the K-MONITOR.
Detailed steps for adjusting settings using dials and buttons.
Explanation of the F buttons for accessing programmed settings.
How to adjust system settings like brightness and volume.
Procedure to access the system settings screen.
Adjusting sound volume, screen brightness, and time/date settings.
Configuration options for unit system, decimal markers, and languages.
How to set the tractor's time and date.
Information on ISOBUS settings (consult dealer).
Information on license confirmation for optional features.
Presetting 3-point hitch height, lowering speed, and draft controls.
Understanding the indicators for the 3-point hitch status.
Checking and modifying settings for remote control valves.
Explanation of the remote control valve chart display.
Detailed preset options for individual remote control valves.
Adjusting oil flow rate and timer settings for remote control valves.
Adjusting differential lock, 4WD, and front suspension settings.
Configuring front suspension modes: Auto, Block, and Manual.
Setting automatic PTO engagement based on implement height.
Adjusting automatic power shift transmission settings.
Configuring automatic gear shifts for field operations.
Adjusting auto shift sensitivity for eco-friendly or power-required operation.
Storing and recalling specific engine RPM settings.
Adjusting CVT settings for sensitivity and response.
Adjusting cruise control speed settings.
Setting the maximum engine RPM to prevent over-revving.
Recording, modifying, and deleting Headland Management System programs.
Steps to record Headland Management System programs by operating the tractor.
Procedure for deleting recorded Headland Management System programs.
Steps to modify existing Headland Management System programs.
How to switch and modify PTO and differential lock programs.
Steps for editing specific parameters within Headland Management System programs.
List of available programs and their detailed settings.
List of available programs and their detailed settings.
Precautions for operating a new tractor during the initial break-in period.
Safe procedures for entering and exiting the tractor cab.
Adjusting the operator's seat for comfort and safety.
Detailed adjustments for seat travel, weight, height, and comfort.
How to adjust the seat's swivel function.
Critical safety instructions for using the seat belt.
Information on the intended use and precautions for the instructional seat.
Specific safety measures when using the instructional seat.
How to adjust the steering wheel for optimal driving position.
Instructions for adjusting the extendable mirrors.
Instructions for using the heater mirror function.
Overview of the tractor's lighting controls.
When and how to use the headlights and position lights.
Operation of the light switch for different lighting configurations.
How to switch between low and high beams.
Operation of turn signals and hazard lights.
How to operate the tractor's horn.
Safety warnings and operating instructions for the brake pedals.
Information on the enhanced braking characteristics of the 4WD system.
Procedure for applying and releasing the parking brake.
How the hydraulic trailer brake system works.
Instructions for connecting pneumatic trailer brakes.
Safety warnings and operating instructions for the clutch pedal.
How to operate the hand throttle for engine speed control.
How to operate the foot throttle for speed control.
Safety warnings and operating procedures for the shuttle lever.
How to use the shuttle button for forward/reverse travel.
How to return the transmission to neutral using the shuttle neutral button.
Operating instructions and limitations for the creep gear shift lever.
Selection and operation of 4WD and auto 4WD modes.
How to switch between different 4WD modes.
Understanding the 4WD indicators on the instrument panel.
Safety warnings and selection of differential lock modes.
How to switch between different differential lock modes.
How to switch between manual and auto shift modes.
Selecting between road and field modes for auto shift operation.
Configuring traveling speed ranges for road mode.
Setting main gear shift ranges for field operations.
Setting traveling speed ranges for road operations.
Setting main gear shift ranges for field operations.
Setting range gear shift ranges for field operations.
How to operate the tractor in manual transmission mode.
How to operate the main gear shift in different modes.
Practical examples of using combined auto and manual shift modes.
Adjusting auto shift sensitivity for different work conditions.
Explanation of Automatic and Manual Engine Speed Setting modes.
Operating the tractor with CVT, using ez-command center or foot throttle.
How to use the main shift with the ez-command center.
Adjusting maximum traveling speed settings for CVT.
How to operate the tractor in automatic mode.
How to operate in manual engine speed setting mode.
Adjusting CVT sensitivity for different operating modes.
Adjusting the CVT response for smooth operation.
Procedures for setting and activating cruise control.
Function and importance of the Ratio Lock button for towing safety.
How to use the Limp Home switch for emergency.
Procedure for safely stopping the tractor.
Understanding the engine over-speed warning indicator.
Understanding the gear shifting warning indicator.
Explanation of the Easy Checker system and its indicators.
How to read the fuel gauge.
Checking the DEF/AdBlue® fluid level.
Checking pneumatic brake system pressure.
How to read the coolant temperature gauge.
Understanding the tachometer for engine speed.
Introduction to the Headland Management System and its benefits.
Steps for pre-programming Headland Management System.
How to operate the Headland Management System.
Choosing between Auto, Block, and Manual front suspension modes.
Switching between Auto, Block, and Manual modes for front suspension.
Understanding the front suspension indicators.
Interpreting indicators related to mode selection.
How traveling speed affects automatic mode switching.
Procedure for safely parking the tractor.
Safety and operational guidelines for road travel.
Specific safety measures for operating the tractor on sloped terrain.
Instructions for safely transporting the tractor.
Proper usage and safety tips for the power steering system.
General safety guidelines for PTO operations.
How to engage and disengage the PTO clutch.
How to view PTO RPM on the instrument panel.
Operation of the external switch for rear PTO engagement.
Selecting PTO operating modes and gear speeds.
Operating instructions and safety for the front PTO.
How to engage and disengage the PTO clutch.
Setting up and operating the automatic PTO function.
Operating instructions and safety for the front PTO.
How to engage and disengage the PTO clutch.
Understanding the PTO clutch indicator.
Importance of keeping PTO shaft covers and caps in place.
Overview of the 3-point hitch system components.
Adjusting the lateral float for implement contour following.
How the floating mechanism works for implement movement.
Choosing the correct top link mounting holes.
Safety precautions for attaching and detaching implements.
Operation of the remote hitch control switches.
Adjusting the length of the lifting rod.
Adjusting the top link for implement angle and length.
How to use the automatic stabilizer for implement control.
Adjusting the width of the lower links for proper implement fit.
Safety and installation instructions for the quick hitch.
Procedure for installing ball-joints onto implements for quick hitches.
Safe procedures for detaching implements from the tractor.
How to use the lock bolt for quick hitch security.
Safety warnings and load references for the drawbar.
How to assemble and use the swing drawbar.
Safety warnings and adjustment for the high-hitch system.
How to adjust the height of the high-hitch.
Coupling and uncoupling procedures for automatic trailer hitch.
High-hitch operation with ball trailer coupling.
Safety warnings and information regarding the Piton-Fix system.
Overview of the front 3-point hitch system and its benefits.
How to control the lift and lower functions of the front 3-point hitch.
Switching hydraulic circuits for single-acting, double-acting, or lock modes.
Adjusting the lower link for different works and transport.
How to fix the top link when not in use.
Safety warnings and overview of the 3-point hitch control system.
Definitions of terms related to the 3-point hitch control system.
How the position lock activates and how to release it.
Activating and conditions for the ride control function.
Selecting between position control and draft control modes.
Adjusting implement height and depth using the hydraulic dial.
How position control maintains implement depth.
How draft control automatically adjusts implement pull.
Using the float control for free movement of lower links.
Adjusting the top limit for the 3-point hitch.
Adjusting the lowering speed of the 3-point hitch.
Operation of the 3-point hitch quick raise/lower switches.
How the position lock activates and how to release it.
Activating and conditions for the ride control function.
Using the power-beyond hydraulic outlet for implements.
Location and use of the hydraulic drain port.
Operation of external hydraulic power outlets.
Types of auxiliary control valves.
Adjusting the flow rate for remote control valves.
How to operate the remote control valve levers.
Operation of remote control valve switches located on rear fenders.
Locking and unlocking remote control valves for safety.
Presetting and confirming settings for remote control valves.
Setting flow rate and timer for remote control cylinders.
Ensuring priority oil flow to specific remote control valves.
Directing oil flow using remote control valve switches.
Operating remote valves and loader functions with a joystick.
Operation of remote control valve switches located on rear fenders.
Connecting single-acting and double-acting cylinders.
Procedures for connecting double-acting cylinders.
Procedures for connecting hydraulic motors.
Safe procedures for connecting and disconnecting remote control valve couplers.
Function of the remote couplers spillage collector.
Reference chart for hydraulic control unit settings based on implement and soil.
Information and safety precautions regarding tractor tires.
Recommended tire inflation pressures for front and rear tires.
Information regarding tractor treads.
Procedure for adjusting front wheel turning stopper bolts.
Adjusting rear tread width with bar type axles.
Information and precautions regarding dual tires.
Instructions for attaching wheels to the rear axle.
Information about the flange type axle.
Adding front weights for stability and traction.
Adding rear ballast for traction and stability.
Using liquid ballast in rear tires for safe and economical ballast.
Installing monolithic blocks for weight.
Information on maximum permissible masses.
Operating and locking/unlocking the tractor doors and windows.
Procedures for locking and unlocking the cab doors.
How to open and close the cab doors.
Operation of the rear window.
Operating the sun roof for ventilation.
Procedures for using the emergency exit.
Operation of the dome light.
Operation of the front and rear wipers and washers.
How to operate the front wiper and washer.
How to operate the rear wiper and washer.
Precautions for using wipers in cold weather conditions.
Adjusting airflow and air direction within the CAB.
Adjusting dashboard and rear air outlets.
Selecting mode and adjusting air temperature.
Adjusting air volume and activating the air conditioner.
Switching between fresh air and recirculated air modes.
Steps for operating the heating system.
Steps for operating the cooling or dehumidifying system.
Procedure for defrosting or demisting the windshield.
Information on the trailer electrical outlet and its functions.
Connecting implements via the ISO Standard 11783 ISOBUS socket.
Information on electrical outlet sockets and their capacities.
Connecting implements via the ISO Standard 11786 signal socket.
Connecting an implement monitor to the ISOBUS socket.
Location and use of the glove box.
Operation of the cigarette lighter and ashtray.
Procedure for installing the implement control box.
Operation of the beacon light switch.
Table detailing maintenance tasks based on operating hours.
Instructions for safely opening the tractor hood.
Procedure for opening and closing the tractor hood.
Instructions for removing the side cover.
Essential daily checks before operating the tractor.
Visual inspection of the tractor for any issues.
Safety precautions and procedures for checking fuel and refueling.
Checking and refilling the DEF/AdBlue® fluid.
Checking the pneumatic brake system pressure.
Procedure for draining water from the water separator.
How to check and maintain the engine oil level.
How to check and maintain the transmission fluid level.
How to check and maintain the engine coolant level.
Cleaning the cooling system components.
Inspecting the Diesel Particulate Filter and SCR muffler.
Inspecting brake pedals for free travel and smooth operation.
Checking the operation and indicator of the parking brake.
Inspecting instrument panel gauges and the Easy Checker.
Inspecting all exterior lights for proper function.
Checking the condition and security of the seat belt.
Checking for smooth movement of levers and pedals.
Ensuring wheel bolts are tightened to the correct torque.
Inspecting tie-rod dust covers for damage.
Checking the air brake system for trailers.
Cleaning the primary element of the air cleaner.
Cleaning dust from pre-cleaner tubes.
Replacing the secondary air cleaner element.
Lubricating grease fittings at specified intervals.
Lubricating grease fittings on various tractor components.
Checking and adjusting brake pedal free travel.
Consult dealer for parking brake lever adjustment.
Checking battery condition and safety precautions.
Measuring brake pedal stroke for proper adjustment.
Checking brake pedal equalizer function.
Procedures and safety for charging the tractor battery.
Checking and topping up front PTO oil.
Cleaning the inner air filter element.
Adjusting front wheel toe-in for proper alignment.
Cleaning the fresh air filter.
Checking and adjusting the fan belt tension.
Procedure for replacing the air conditioner drive belt.
Diagram showing fan and air conditioner belt routing.
Cleaning the water separator.
Cleaning the fuel solenoid pump element.
Procedure for changing transmission fluid.
Procedure for changing rear axle case oil.
Procedure for replacing the transmission oil filter.
Procedure for changing the engine oil.
Procedure for replacing the engine oil filter.
Cleaning the pre-fuel filter.
Procedure for replacing the fuel filter.
Procedure for replacing the hydraulic oil filter (suction).
Procedure for replacing the hydraulic oil filter (return).
Procedure for replacing the power steering oil filter.
Checking radiator hoses and clamps for proper condition.
Checking fuel lines and hose clamps.
Checking intake air lines and hose clamps.
Consult dealer for brake hose service.
Checking differential lock hoses and hose clamps.
Checking lift cylinder hoses and hose clamps.
Checking power steering lines and hose clamps.
Checking oil cooler lines and hose clamps.
Checking front suspension hoses and hose clamps.
Checking air conditioner pipes and hoses.
Checking the air conditioner drive belt tension.
Procedure for changing front PTO oil.
Procedure for changing transmission fluid.
Procedure for replacing the transmission oil filter.
Procedure for changing rear axle case oil.
Procedure for changing front differential case oil.
Procedure for changing front axle gear case oil.
Consult dealer for engine valve clearance adjustment.
Replacing air cleaner elements at specified intervals.
Consult dealer for exhaust manifold check.
Consult dealer for fuel injector nozzle tip cleaning.
Consult dealer for DEF/AdBlue® injector tip check.
Checking DEF/AdBlue® lines for connections and damage.
Consult dealer for DPF differential pressure sensor hose replacement.
Consult dealer for boost sensor hose replacement.
Consult dealer for parking brake cable replacement.
Procedure for bleeding air from the fuel system.
Consult dealer for brake system bleeding service.
Procedure for replacing tractor fuses safely.
Instructions for replacing various light bulbs on the tractor.
Procedure for replacing headlamp bulbs safely.
Locations for lubricating points.
How to add washer liquid.
Checking the refrigerant level in the air conditioning system.
Safe procedures for washing the tractor, especially with high pressure washers.
Specific precautions when washing the tractor, avoiding glass and electrical parts.
Procedures for storing the tractor for extended periods.
Steps to prepare the tractor after storage.
Diagnosing and resolving issues with the electric control system.
List of abbreviations for electric control units.
Reference table for error codes, their meaning, and recommended actions.
Troubleshooting specific errors related to buttons and switches.
Troubleshooting errors related to sensors and switches.
Troubleshooting errors related to PTO, shuttle lever, and Headland Management System.
Troubleshooting errors related to sensors, switches, and operational errors.
Troubleshooting errors related to GPS, steering, and transmission.
Troubleshooting errors related to brake pedal, PTO, and tire circumference.
List of optional parts and accessories available for the tractor.
Maximum permissible load capacities for tractor tires and axles.
Index of topics covered in the manual.
Index of topics covered in the manual.
To Next Page
General
