EasyManua.ls Logo

Kubota RTV 900 User Manual

Kubota RTV 900
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Installation & Operations Manual
2010 Kubota RTV 900 Soft Top & Rear Panel
Seizmik makes Windshields, Doors,
Tops, Hood Racks, Brush Guards, and
other great accessories for utility
vehicles & side x sides. Our products
are engineered tough for long life
and tested under the harshest of
conditions. Always observe the
warnings and precautions in this
manual when using your Seizmik
products. For best results, carefully
follow the instructions in this manual
and make no modifications.
Seizmik products are designed,
developed and manufactured by
Vialink Corp. If you have any
questions, comments, need
assistance, or are missing parts, please
call 1-866-838-3366 ext.110 between
9:00AM and 5:00PM EST. You can
email us at support@seizmik.com.
Part# 18046
Textile Panel: 54-SW-90601
Tension Strap: 54-SW-90602
How to use this manual:
Be sure to read through the entire manual carefully
before beginning installation.
Read all warnings and precautions carefully and follow safety procedures
Each Seizmik product has a “difficulty-to-install” rating based on the following:
•Easy – uses basic hand tools and does not require any modifications to the existing structure of your vehicle. Most Seizmik
products fall into this category. Hey, why be difficult?
•Skilled – requires a little more skill to install properly. May require modifications to the vehicle (drilling, electrical, etc. as well a
s
the use of power tools.
•Difficult – May require welding or extensive mechanical work for proper installation. Hardly any Seizmik products fall into this
category but we had to say it.
Watch for the following symbols:
Installation information:
This product has an installation rating of: E
asy
Approximate installation time: 5 Minutes
This product is easiest to install with: 1 Person
CAUTION – Indicates an installation or operational step or procedure that if not followed could result
in damage to the product or you. Use caution when you see this symbol and follow all instructions.
T
IP – Indicates an installation or operation tip. These tips can help you avoid installation problems,
ensure safe and easy operation, and make sure everything goes smoothly.
W
ARNING – Indicates an installation or operational procedure that must be observed to prevent
serious injury or death.
Trailering Info:
ONLY trailer with rear window open and top fully an properly secured.
MAX SPEED – 55 MPH

Other manuals for Kubota RTV 900

Question and Answer IconNeed help?

Do you have a question about the Kubota RTV 900 and is the answer not in the manual?

Kubota RTV 900 Specifications

General IconGeneral
BrandKubota
ModelRTV 900
CategoryUtility Vehicle
LanguageEnglish

Summary

Introduction and Preparation

How to Use This Manual and Safety Symbols

Guides on manual usage, and explains safety symbols (CAUTION, TIP, WARNING) for safe operation.

Installation and Trailering Guidelines

Provides product installation details (rating, time, personnel) and crucial trailering precautions.

Soft Top Installation Steps

Initial Clamps and Strap Fastening

Instructions for removing existing clamps and fastening tension straps on the ROPS for roof support.

Positioning and Securing the Soft Top

Details on laying the soft top over the ROPS and reinstalling front windshield clamps.

Completing Soft Top Installation

Securing Front and Rear Straps

Guides on fastening straps around the front cross bar and rear vertical ROPS bars for a secure fit.

Finalizing Front Corners and Straps

Instructions for tightening front-to-rear straps and securing front corners with adhesive velcro.

Finishing Installation and Features

Securing Rear Straps and Final Adjustments

Fastening the rear cab strap and applying velcro to the passenger side panel for a proper fit.

Soft Top Features and Support

Highlights features like the roll-up rear window and velcro strip, plus how to get help.

Related product manuals