Why is my Kubota Farm Equipment making noise during work?
If your Kubota Farm Equipment is producing noise during work, check the tine supports and screwed connections on the tines. Also, replace any broken tines on the tine saver.
What to do if Kubota Farm Equipment is not operating cleanly at high speed?
If your Kubota Farm Equipment isn't operating cleanly at high speed, it could be due to the speed being too fast for the amount of fodder. Try reducing your speed. It may also be caused by rotor tines set too high.
Why is the slip clutch responding frequently on my Kubota Farm Equipment?
If the slip clutch on your Kubota Farm Equipment is responding frequently, it could be due to a fodder mass that is too great or irregular. Reduce your speed and PTO stub shaft speed. Another possible cause is the working depth being set too low.
How to fix a Kubota Farm Equipment rotor that is leaving crop behind?
If the rotor on your Kubota Farm Equipment is leaving crop behind across the entire width, the working depth may be set too high.
Why do the tines graze the ground during transportation of my Kubota Farm Equipment?
If the tines on your Kubota Farm Equipment graze the ground during transportation, fully raise the machine and close the ball valve, as the drawbar cylinder lowers if the hydraulic control device is not sealed off.
General| Brand | Kubota |
|---|---|
| Model | TE4052T |
| Category | Farm Equipment |
| Language | English |
Information on the manual's audience and the meaning of symbols used.
Essential safety principles and definitions of danger, warning, and caution.
Explanation of safety labels attached to the machine and their meanings.
Guidelines for qualified operators, securing the machine, and avoiding hazards.
Specific safety measures for connecting hydraulics and handling PTO shafts.
Regulations and safety practices for safe road transport of the machine.
Safety protocols for performing maintenance, cleaning, and care tasks.
Safety precautions to be observed when parking and storing the machine.
Overview of machine features, technical specifications, and identification of components.
Procedures for checking delivery scope and proper handling of the PTO shaft.
Detailed steps and safety measures for coupling the machine to the tractor.
Instructions for connecting hydraulic lines and the PTO shaft correctly.
Essential safety checks, unfolding, and working depth adjustments before operation.
Guidelines for safe road transport, including regulations and preparation steps.
Safety rules for operating the machine, including crop processing and working speed.
Safety measures and procedures for cleaning and maintaining the machine.
Steps for safely parking, storing, and uncoupling the machine.
Essential safety rules and precautions for all servicing tasks.
Procedures for greasing, lubrication, tightening screws, and checking components.
Specific maintenance requirements for tyres and hydraulic systems.
Information on available accessories and a guide to resolving common machine faults.
The hydraulic system diagram and guidelines for environmentally friendly machine disposal.
To Next Page
