ENGINE
DIESEL PARTICULATE FILTER HANDLING MANUAL, WSM
1-S35
Step2
1. Execute the request by the "DPF Manual Regeneration
Request Function" in the utility functions of the diagnosis tool,
and give the command to execute on the application side.
(When the execution button is not on the application side, ECU
on the application side receives the request signal and gives
command to execute.)
Step3
1. Check if the "DPF Regeneration Control Level" and the "DPF
Regeneration Control Status" shows "Level 0" by the monitor
functions in the diagnosis tool.
If the level is 0, it means that manual regeneration has
completed.
To Next Page