What to do if Kubota Engine exhaust suddenly turns dark?
If the exhaust from your Kubota Engine suddenly turns dark, it indicates a problem with the fuel injection system. Focus your inspection on the fuel injection nozzle.
What to do if Kubota V3600-E3 Engine revolution suddenly decreases or increases?
If the revolution of your Kubota Engine suddenly decreases or increases, you should check the adjustments, injection timing, and the fuel system to identify the cause of the issue.
What to do if the oil lamp lights up during operation of my Kubota Engine?
If the oil lamp lights up during the operation of your Kubota Engine, check the lubricating system. Also check if the engine bearing clearances are within factory specs. Inspect the function of the relieve valve in the lubricating system. Check pressure switch and filter base gasket.
What causes Kubota V3600-E3 revolution to suddenly decrease or increase?
If your Kubota Engine revolution suddenly decreases or increases, check the adjustments, injection timing, and the fuel system.
What to do if bearing parts are overheated in Kubota V3600-E3?
If bearing parts are overheated in your Kubota Engine, check the lubricating system.
What to do if Kubota V3600-E3 Engine oil lamp lights up during operation?
If the oil lamp lights up during the operation of your Kubota Engine, it indicates a problem with the lubricating system. You should check the lubricating system to identify the cause.
What to do if Kubota V3600-E3 Engine makes an unusual sound?
If you suddenly hear an unusual sound coming from your Kubota Engine, carefully check all moving parts to identify the source of the noise.
What to do if Kubota V3600-E3 Engine bearing parts are overheated?
If the bearing parts of your Kubota Engine are overheated, you should check the lubricating system to ensure proper lubrication.
General| Engine Model | V3600-E3 |
|---|---|
| Aspiration | Naturally Aspirated |
| Starting System | Electric |
| Fuel | Diesel |
| Combustion system | Direct Injection |
| Displacement | 3.6 L |
| Bore x Stroke | 100 mm x 120 mm |
| Rated Output | 2600 rpm |
| Max. Torque | 235 Nm at 1600 RPM |
| Cooling System | Water-cooled |
| Lubrication System | Forced Lubrication |
To Next Page
