Need help?Do you have a question about the Kubota Z482-E2B and is the answer not in the manual?
General| Engine Model | Z482-E2B |
|---|---|
| Number of Cylinders | 2 |
| Fuel System | Direct injection |
| Fuel | Diesel |
| Cooling System | Water cooled |
| Starting System | Electric starter |
| Type | Vertical, water-cooled, 4-cycle diesel |
| Displacement | 479 cc |
| Rated Output | 3600 rpm |
| Lubrication System | Forced lubrication |
Definitions of safety levels (DANGER, WARNING, CAUTION) and general warnings.
Essential steps to take before starting any maintenance work on the engine.
Information on how to identify the engine model and serial number.
A comprehensive list of scheduled maintenance tasks by interval.
Detailed maintenance steps for various intervals.
Routine inspections for engine oil and coolant levels.
Initial and regular maintenance tasks required at 50 operating hours.
Maintenance tasks required every 100 operating hours.
Maintenance tasks for major service intervals at 1500 hours.
Maintenance procedures based on a two-year time interval.
List and description of specialized tools needed for engine service.
Details on the construction of the main engine body components.
Information on piston coating and the oil pan's extended design.
Explanation of the engine cooling system and its components.
Description of cooling fins for temperature regulation.
A guide to diagnosing and resolving common engine problems and symptoms.
Key technical data and tolerances for engine parts during servicing.
Critical torque values for fasteners during assembly.
Standard torque values for common fasteners.
Detailed procedures for engine maintenance and repair.
Procedures for initial checks and adjustments.
Procedures for checking compression pressure and valve clearance.
Step-by-step procedures for taking apart and reassembling engine components.
Steps for disassembling major internal components like cylinder head and crankshaft.
Detailed repair and adjustment steps for engine parts.
Detailed procedures for servicing the cylinder head and its components.
Procedures for measuring and replacing crankshaft bearings.
Procedures for checking cylinder wear and servicing pistons.
To Next Page
