What to do if my Kubota Z602-E has excessive concentration of antifreeze?
If your Kubota Engine has an excessive concentration of antifreeze, add water only or change to coolant with the specified mixing ratio.
What to do if my Kubota Engine suddenly stops?
If your Kubota Engine suddenly stops, check the fuel tank and refill it if necessary. Also, inspect the fuel system for any air or leaks that may be causing the issue.
What to do if the fuel of my Kubota Z602-E Engine is of extremely poor quality?
If the fuel used in your Kubota Engine is of extremely poor quality, select good quality fuel. Use No. 2-D diesel fuel only.
What to do if my Kubota Z602-E Engine output is insufficient?
If your Kubota Engine's output is insufficient, check the fuel system for air or water. Also, clean the nozzle element if it is deposited with impurities. Verify that the clearance of the bearing is within factory specifications if there are thick carbon deposits on the orifice of the injection nozzle. If the injection pump is worn, check the fuel injection pump element and delivery valve assembly, and replace them as needed.
What to do if my Kubota Engine oil is insufficient?
If your Kubota Engine oil is insufficient, check the oil level and replenish the oil as required.
What to do if the fan belt on my Kubota Z602-E Engine is broken or elongated?
If the fan belt on your Kubota Engine is broken or elongated, you should change the belt or adjust the belt tension.
What to do if the head gasket of my Kubota Z602-E Engine is defective?
If the head gasket of your Kubota Engine is defective or there is water leakage, replace the parts.
What to do if the radiator net of my Kubota Engine is clogged with dust?
If the radiator net or radiator fin of your Kubota Engine is clogged with dust, clean the net or fin carefully.
What to do if I hear an unusual sound from my Kubota Engine?
If you hear an unusual sound coming from your Kubota Engine, check all moving parts carefully.
What to do if my Kubota Z602-E Engine is overload running?
If your Kubota Engine is overload running, reduce the load.
General| Engine Model | Z602-E |
|---|---|
| Number of Cylinders | 2 |
| Combustion System | Direct Injection |
| Cooling System | Water-cooled |
| Fuel | Diesel |
| Starting System | Electric starter |
| Engine Type | Vertical, Water-cooled, 4-cycle, Diesel |
| Fuel System | Direct injection |
| Lubrication System | Forced Lubrication |
| Power Output | 8.5 HP (6.3 kW) at 3000 rpm |
Details pre-operation checks including guards, distance, children/livestock, and starter terminals.
Covers fire prevention during refueling, handling flammable fuels, and proper storage containers.
Details precautions against burns from hot components and explosion hazards related to batteries.
Lists essential daily checks before starting the engine for preventive maintenance.
Provides step-by-step instructions for starting the engine under normal conditions.
Details specific procedures for starting the engine in cold temperatures, including preheating.
Outlines checks to perform while the engine is running, focusing on coolant and oil pressure.
Describes how to identify and remedy reversed engine operation, a critical safety issue.
Provides a detailed schedule of maintenance tasks based on operating hours.
Describes how to check, add, and change engine oil to maintain correct levels.
Advises on actions to take when the engine overheats.
Lists common causes and countermeasures when the engine is difficult to start.
Identifies causes and solutions for insufficient engine output.
Provides troubleshooting steps for when the engine suddenly stops.
Lists causes and remedies for engine overheating issues.
To Next Page
