Need help?Do you have a question about the Kubota Z602-E3 and is the answer not in the manual?
General| Engine Model | Z602-E3 |
|---|---|
| Engine Type | Vertical, water-cooled, 4-cycle diesel |
| Number of cylinders | 2 |
| Combustion system | Direct injection |
| Cooling system | Water-cooled |
| Starting System | Electric start |
| Bore x stroke | 72 mm x 73 mm |
| Rated output | 3600 rpm |
| Max. Torque | 2400 rpm |
| Lubrication System | Forced lubrication |
Read and understand manual and labels before operating the engine.
Use PPE and avoid loose clothing to prevent injury during operation.
Inspect engine, ensure guards are in place, check safe distance before starting.
Keep engine and area clean, store flammable fluids properly, check for leaks.
Stop engine before refueling, avoid sparks, refuel in ventilated areas.
Ensure ventilation, avoid combustibles near exhaust, check for leaks.
Relieve pressure before disconnecting, use caution with pressurized fluid, seek medical help if injured.
Be cautious of hot parts, battery hazards, and avoid touching terminals.
Stop engine before checking, keep clear of moving parts, use safety guards.
Handle anti-freeze safely, do not mix types, dispose of fluids responsibly.
Follow safety procedures during inspections and maintenance.
Identify and understand warning and caution labels for safe operation.
Keep labels clean, intact, and replace damaged ones for safety.
Find and record your engine's serial number for dealer service and parts.
Initial engine break-in procedures, including oil change after 50 hours.
Essential checks before each engine operation to ensure proper condition.
Step-by-step guide for starting the engine under standard conditions.
Special procedures for starting the engine in cold ambient temperatures.
Correct procedure for shutting down the engine to prevent damage.
Monitor engine performance and indicators while the engine is running.
How to identify and address engine running in reverse.
Table outlining recommended maintenance tasks and their frequencies.
Procedures for fuel handling, checking, refueling, and bleeding the fuel system.
Steps for checking, adding, changing engine oil, and replacing the oil filter.
Checking coolant, changing coolant, hoses, anti-freeze, and radiator cement.
Maintenance for air cleaner, battery charging, and electric wiring.
Adjusting fan belt tension and reviewing service intervals.
Safe procedures for transporting and lifting the engine.
Steps for storing the engine for extended periods to prevent damage.
Causes and countermeasures for engine starting problems.
Causes and countermeasures for reduced engine power.
Causes and countermeasures for unexpected engine shutdown.
Diagnosing and resolving issues related to abnormal exhaust color.
Conditions requiring immediate engine shutdown and troubleshooting.
To Next Page
