• Make sure the appliance is disconnected from the power supply. Wash the
removable parts and accessories (baking tin, kneading paddles, ingredient
dispenser, measuring spoon and cup, and the hook) with a soft sponge
in warm water and a little washing-up detergent to remove any dust from
transport. Do not use any abrasives in order not to damage the non-stick
coating. Rinse with clean water and dry thoroughly.
• Reinsert the baking tin rmly into the process chamber until it clicks
securely into place. If it does not seem to t properly, or gets stuck at an
angle, move the tin a little and press down rmly on both sides of the rim
until it clicks securely into place.
• Place the kneading paddles onto the spindles inside the baking tin (Fig. 1).
They only t one way.
• Close the lid and install the automatic ingredient dispenser back in its
place (Fig. 2).
• Your new bread maker is now ready for use.
Getting Started (Cont.)
Fig. 1
Fig. 2
To Next Page
Loading...
