10
Assembling the Unit
1. Lid and power unit: The lid and power unit come assembled as the top part
of the ice cream maker.
• The lid can be taken off the power unit for washing, just press the release
button at the back and separate the parts.
• To reassemble the machine, place the power unit into its space on the lid
and press the release button; the unit will click securely into place (Fig. 1).
2. Spindle and paddle: The paddle attaches to the spindle, which fits into the
socket at the bottom of the power unit. It will click into place (Fig. 2).
Fig. 1
Fig. 2
Getting Started (Cont.)
FREEZING THE BOWL
The most important step in making ice cream is to ensure the inner bowl is
properly frozen. It takes at least 8 hours for the bowl to freeze at –18ºC or below,
or longer if your freezer runs at a higher temperature.
• If you have sufficient space in the freezer, we suggest you store the bowl
permanently in the freezer to ensure you can make ice cream any time
you feel like it.
• Before freezing the bowl, ensure it is clean and thoroughly dry. Place the bowl
in a plastic bag and place it in the freezer in an upright position.
• To check whether the bowl is completely frozen, shake it. If you still hear the
cooling liquid moving, return it to the freezer until fully frozen.
To Next Page
Loading...