Kuchef CPJ1502 - Step-by-Step Assembly Guide; Assembly Procedure

12
After Sales Support
Telephone: 1300 663 907
Email: customercare
@
winplus.com.au
Assembly Instructions
Note:Beforerstuse,disassembletheSlowJuicerandwashallremovablepartsinwarm
waterwithabio-degradablenon-abrasiveliquiddetergent.Rinsethoroughlywithwater
and allow to air dry.
Warning:NeversubmergetheSlowJuicerbaseinwateroranyotherliquid.
Note:TheSlowJuicermustbeassembledinthefollowingorder:
a. Bowl
b. Rotating basket
c. Strainer
d. Auger
e. Food chute
1. 2.
Assemble the rotating basket
then the strainer inside the bowl.
Ensure the red dot on the rotating
basket lines up with the red dot
on the bowl.
Place the bowl on the base using
the safety lock symbol as a guide.
Twist the bowl gently clockwise to
lock the bowl rmly to the base.