FAQ
Problem Solution
My Food Processor won’t
turn on
• Check that the Food Processor is correctly plugged
into a power outlet.
• Check the power outlet is turned on.
• Check that you have turned the dial to “1”, “2” or “P”
according to instructions on page 13.
• Check the bowl and lid have been correctly
assembled; a safety mechanism will prevent the Food
Processor from operating if they are not positioned
correctly.
I can’t attach the bowl to
the base
• Ensure you have correctly positioned the bowl on the
base, the handle should be facing to the right. See
instructions on page 12.
The blades are rattling • You may have incorrectly mounted the blade to the
spindle, ensure you follow the instructions for blade
assembly on page 10.
There are bits of food
stuck between the
processing disc and lid
• When feeding ingredients down the feed chute it
is common for the ends to become stuck and not
feed through, this is normal. Turn the appliance OFF,
remove the lid and remove the stuck ingredient.
I can’t get even slices • When feeding ingredients through the feed chute,
pack them so you are able to apply even pressure
with the plunger while pushing down.
My Food Processor
stopped working
• Turn the speed dial to “0”. Turn the power point
off and unplug the appliance. Check that you have
assembled the food processor and accessories
correctly. Plug appliance back into a power point and
turn on, check that it is working again.
To Next Page
Loading...
