7
Healthy Fryer Instructions
1. Press the lid open button, the lid will open automatically.
2. Fitting the rotating ring assembly:
The rotating ring assembly must be fitted the correct way up as shown in figure 1 below.
Two of the wheel axles are stamped with word “UP”. This must face upwards when the roller is correctly
fitted. If, during use, the pot makes excessive noise or fails to rotate properly, make sure that the rotating
ring assembly is fitted the right way up.
1) Place the rotating ring assembly centrally into the bottom of your Health Fryer.
2) Place the pot into the body of your fryer as shown in figure 2 below.
3) Fit the mixing arm onto the spindle in the pot in figure 3 below.
3. Mix food with one spoon of oil evenly in a separate container and pour into the pot.
AFTER SALES SUPPORT
AUS Hotline Costs
1800 813 866
MODEL: KA0151 PRODUCT CODE: 42312 06/2014
service@hifu.com.au
AUS
Figure 1 Figure 2 Figure 3
To Next Page
Loading...
