KUGELHAHN MÜLLER KM-O Series - 1 Product Information; Bill of Material · Teflon Design

4 of 17
SERIES: KM-O(ST) & KM-T(ST)
Operating and maintenance instructions
1. PRODUCT INFORMATION
1.1 BILL OF MATERIAL · TEFLON® DESIGN
DN 15 – DN 200
PN 10/16 – PN 40
Item Qty Designation Materials
1 1 Valve body 1.4408/1.0619
2 1 Counter flange F1/F27 1.4408/1.0619
3 1 Ball 1.4404/1.4408
4 2 Ball seat PTFE/25% Glass
5 1 Shaft 1.4571/1.4404
6 1 Spring 1.4401
7 1 Guide bushing PTFE-P
8 1 Stung box 1.4571/1.4404
9 3 Belleville spring 1.4310
10 1 Pressure piece 1.4571/1.4404
Item Qty Designation Materials
11 3 Package PTFE
12 1 Slide ring PTFE
13 1 Valve body seal PTFE
14 Hexagon screws A4-70
15 1 Stop pin 1.4305
16 1 Hand lever 1.4308
17 1 Disk Stainless steel
18 1 Spring washer DIN 127 A4-70
19 1
Cylinder screws DIN
912
A4-70
TYPE KM-TXST-F1/F27
STAINLESS STEEL
TYPE KM-TAST-F1/F27
STEEL