Need help?Do you have a question about the KUHN GA6501 and is the answer not in the manual?
General| Model | GA 6501 |
|---|---|
| Working Width | 6.40 m |
| Number of Rotors | 2 |
| Transport Width | 2.98 m |
| Weight | 1200 kg |
| Rotor Speed | 540 rpm |
Shows the Gyrorake in its operational configuration.
Displays the Gyrorake positioned for road transport.
Details the location and information on the machine's identification plate.
Lists available optional equipment for the Gyrorake.
Explains the meaning of symbols used in the manual for safety.
Provides essential safety guidelines and precautions for operation.
Shows where safety decals are located and explains their warnings.
Details road safety equipment and recommended driving practices.
Defines key terms and components of the Gyrorake.
Lists detailed technical data and specifications for the GA6501.
Outlines essential equipment required for the machine's operation.
Provides information on measured sound levels during operation.
Identifies and describes the machine's control components.
Explains the procedures for attaching and detaching the machine.
Instructions for preparing the tractor before coupling the machine.
Step-by-step guide to securely couple the Gyrorake to the tractor.
Details how to connect the machine's hydraulic hoses to the tractor.
Explains how to connect the machine's electrical plug to the tractor.
Covers greasing and checking the PTO shaft for proper function.
Procedures for adjusting the machine's frame height for optimal operation.
Step-by-step guide for safely detaching the Gyrorake from the tractor.
Steps to correctly position the machine for road transport.
Ensures compliance with all applicable road regulations for transport.
Guide to unfolding the Gyrorake from transport to working configuration.
Details on making adjustments for optimal working performance.
Instructions for adjusting the working width of the Gyrorake.
Explains how to set the correct rotor height for efficient operation.
General guidelines and precautions for operating the Gyrorake.
How to position the machine for headland turns.
Recommended working speeds for the Gyrorake.
Information on the optional steering system for the Gyrorake.
Lubrication instructions for the optional steering system.
Details the check chains, their function, and kit number.
Explains clearance lights and their conformity with regulations.
Describes the SMV warning sign and its purpose.
Covers coupling and uncoupling of European signalling equipment.
Details coupling and uncoupling for USA signalling equipment.
Provides a chart for regular maintenance and lubrication intervals.
Instructions for cleaning the Gyrorake after use.
Detailed lubrication points and procedures for the machine.
Maintenance and greasing instructions for PTO shafts.
Specific points and methods for greasing the machine's components.
Information on using oil for lubrication of certain parts.
General maintenance procedures for the Gyrorake.
How to check the oil level in the main gearbox.
Instructions for checking the tightness of nuts and screws.
Detailed steps for replacing an oscillating shaft.
Recommended tyre pressures for transport and rotor wheels.
Guidelines for storing the machine at the end and start of the season.
To Next Page
