Why is my KUHN Farm Equipment torque limiter disengaging frequently?
The torque limiter might be disengaging frequently because the load on the tine arms is too high. To resolve this, adjust the wheel height. Alternatively, reduce the ground speed.
What to do if KUHN GA300G Farm Equipment has crop pick up at the rear of the rotor?
If you notice crop pickup at the rear of the KUHN Farm Equipment rotor, it could be due to several reasons. First, the swaths might be too compact between the tines and the swath screen; increase the swath screen distance. Second, earth clods on the tines can cause this issue; adjust the wheel height. Finally, the rotor speed might be too high; reduce the PTO speed.
Why is my KUHN Farm Equipment rotor vibrating unusually?
Unusual rotor vibrations in your KUHN Farm Equipment may be caused by the rotor speed being too high. Check the PTO speed and ensure it's at 540 min-1 max.
What to do if KUHN Farm Equipment has poor raking over the whole rotor width?
If your KUHN Farm Equipment is showing poor raking over the entire rotor width, it might be because the tines are too far from the ground. You can fix this by adjusting the wheel height.
What to do if KUHN Farm Equipment has crop ejection at the front of the swath screen?
If you're experiencing crop ejection at the front of the swath screen on your KUHN Farm Equipment, it could be due to an incorrect swath screen position, specifically if it's too much at the rear. Move the swath screen forwards. You may also need to reduce the PTO speed.
What to do if KUHN GA300G has poor raking on one side of the rotor?
If your KUHN Farm Equipment is raking poorly on one side of the rotor, the rotor might be tilted towards the opposite side. Adjust the wheel height to achieve the same tine-to-soil distance on both sides of the machine.
What to do if KUHN Farm Equipment has poor raking on the two sides?
If your KUHN Farm Equipment is exhibiting poor raking on both sides, the rotor is likely tilted frontward. You can correct this by lengthening the top link or adjusting the wheel height.
What to do if KUHN Farm Equipment has poor raking in the middle?
If your KUHN Farm Equipment is not raking well in the middle, it's probably because the rotor is tilted rearwards. Shorten the top link to resolve this issue.
What to do if KUHN Farm Equipment has crop ejection underneath the swath screen?
If you're seeing crop ejection underneath the swath screen of your KUHN Farm Equipment, it indicates that the swath screen position is incorrect, being too far away from the ground. Move the swath screen downwards to fix this.
General| Brand | KUHN |
|---|---|
| Model | GA300G |
| Category | Farm Equipment |
| Language | English |
Front/rear views and model identification plate of the Gyrorake.
Explains safety symbols, provides instructions, and general operational precautions.
Covers driving precautions, road transport safety, weight management, and PTO safety.
Safety related to maintenance, machine use, tires, decals, and waste.
Detailed technical data including dimensions, power, weight, and tyre specifications.
Detailed steps for preparing, adjusting, and using the Gyrorake.
Steps and procedures for coupling and preparing the machine for use.
Guidelines for routine maintenance, lubrication, and seasonal storage.
To Next Page
