Need help?Do you have a question about the KUHN GA 4511 GM and is the answer not in the manual?
General| Brand | KUHN |
|---|---|
| Model | GA 4511 GM |
| Category | Farm Equipment |
| Language | English |
Defines the intended purpose and limitations of the GA 4511 GM Gyrorake. Manufacturer not liable for other uses.
Step-by-step guide to fitting the machine's guard support, front hinges, and guards.
Instructions for installing the hydraulic cylinder and connecting the hydraulic hoses to the machine.
Procedures for attaching warning boards, lights, and electrical harness to the machine.
Details on how to fit the swath board onto its support using screws and spacers.
Guide on how to install tine arms and tines, including proper orientation and lubrication.
Instructions for connecting the GA 4511 GM to tractors with DIN or ASEA Standard 3-point linkage.
Guidance on connecting the PTO shaft to the tractor's 540 rpm drive, including length and angle checks.
How to adjust the bogie axle height for optimal ground clearance and tine sweep.
Instructions for lowering and raising the machine guards for transport and work positions.
Details on adjusting the swath screen's sideways, vertical, and lengthways positions for optimal windrow formation.
Advice on selecting appropriate forward speeds based on crop and terrain conditions for efficient operation.
Information on fitting and adjusting the optional front support wheel for improved performance on uneven ground.
To Next Page
