EN EN
Please carefully check for any loss or damage. If so, please contact us promptly.
Lubricating oil: Every six months, a small amount of white lubricating grease or lubricant needs to be added
to the folded area for maintenance.The scooter should be inspected every three months to see if any screws are
loose. If any are loose, please tighten them.
Battery: When the scooter is charging or not in use, please turn off the power. When it is not in use for a long
time, the electric scooter should be placed in a safe location and charged at least once every 3 months.
Storage: Please do not leave the scooter in scorching sun or other severely humid areas for a long time. Please
keep the scooter clean.
6.Assembly guidelines
7.Maintenance
5.Packing list
4.Argument list
Product name
Size
Unfolded size
1425*640*1340mm
Unpacking and assembly
Fold and unfold
1425*640*668mm
≤ 86 km/h
≤ 95 km
≤ 38°
12 inch off-road tires
Hydraulic+damping shock absorption
1.Open the hook and support
the kickstand.
2.Align the vehicle body rod,
tighten the locking buckle, and
tighten the wrench.
3.Tighten the handlebar fixing clamp
block with screws, install the handlebar
and hanging bag, and start the machine
for inspection.
1.Grasp the body lever and
open the wrench.
2.Loosen the locking buckle
and pull the body rod upwards.
3.Fold up the body pole, hang
the hook, and retract the kickstand.
IP54
Front and rear oil brakes+electronic brakes
Speed, mileage, battery level, front light, etc.
LED
200~240V/50~60Hz
60V/35.2Ah
Charger of 67.2V/5A ,charges for about 7 hours.
150 kg
About 64 kg
Folded size
Maximum speed
Medium-speed endurance
Maximum slope
Tires
Shock-absorbing
Brakes
Waterproof
Display device
Lighting
1600W*2
Power
1900rmp
Max RPM
41N.M
Max Output Torque
Input voltage
Voltage/Capacity
Charging time
Maximum load
Net weight
1.User's manual*1 2.Tire pump*1 3. Tool kit and screw
accessories
4.Charger*1 5. Bag * 1
Parameters
Motor data
Weight
Battery data
To Next Page
Loading...
