What to do if indicator lights on Kumio Ice Maker are not on?
If all the indicator lights on your Kumio Ice Maker's display are off, it could be due to a blown fuse. In this case, replace the fuse. Alternatively, the issue might be that the power is off; simply turn the power on.
What to do if water shortage indicator light is on in Kumio ICM1234?
If your Kumio Ice Maker shows the water shortage indicator, it means one of two things: either there is no water in the machine, in which case you should add water until it reaches the MAX position, or the pump is full of air. If the pump is full of air, press the POWER button to restart the machine.
Why is Kumio ICM1234 Ice Maker making large ice with pieces sticking together?
If your Kumio Ice Maker is producing ice that is too large and the pieces are sticking together, this can happen if ice from previous cycles is left in the water tray. To resolve this, take out the ice while the machine is in standby state.
What to do if all indicators twinkle simultaneously on Kumio ICM1234?
If all indicators on your Kumio Ice Maker are twinkling simultaneously, it could be that the water tray is blocked by an ice cube. Unplug the power to remove the ice blocking the tray, then plug the power back in and press the POWER button. The machine will restart after 3 minutes. If this does not help, call the service hotline.
What to do if Kumio ICM1234 makes ice correctly, but no ice comes out?
If the ice making process of your Kumio Ice Maker seems correct, but no ice comes out, call the service hotline. The compressor may have no refrigerant, the compressor might be damaged, or the fan motor might be damaged.
Why is water warming in Kumio ICM1234 Ice Maker even when the machine is working?
If your Kumio Ice Maker has been working, but the water has been warming up, it is possible that the solenoid valve has broken down. Replace the solenoid valve to fix this issue.
Why doesn't Kumio Ice Maker display ICE FULL icon when ice is full?
If your Kumio Ice Maker does not display the ICE FULL icon when the ice is full, it may be due to a damaged ice full sensor. Replace the ice full sensor. Another possible reason is sunlight interference; try making ice indoors.
Why does compressor of Kumio ICM1234 work abnormally with a buzzing noise?
If the compressor of your Kumio Ice Maker is working abnormally and making a buzzing noise, it could be due to the voltage being lower than recommended. Stop the ice maker and do not restart it until the voltage is normal.
Explains the function of the POWER and SELECT buttons for operating the ice maker and selecting ice size.
Details the meaning of ADD WATER, ICE FULL indicator lights and their associated alarms.
Describes how to activate and what to expect during the self-cleaning cycle of the ice maker.
Guides users through the first steps of adding water and starting the ice maker, including initial cautions.
Provides instructions on how to clean the ice maker's internal and external parts and maintain ventilation.
Explains how to resolve ice jams caused by power interruptions or button presses and how to restart.
Details how to check and fix issues with the ice shovel not reaching the ice basket, possibly due to a tilted reservoir.
Lists crucial warnings regarding power cord damage, water type, operating temperatures, and children's use.
Informs users about the environmentally responsible disposal of the product according to EU regulations.
To Next Page
General
