Kunft KSM2612 - 2.2.13. Zigzag sewing; 2.2.14. Three-needle Zigzag sewing; 2.2.15. Blind sewing; 2.2.16. Button Hole sewing

16
17
KSM2612
2.2.13. “Zigzag” sewing
The “Zigzag” stitch sewing method is the same as for straight sewing
except for adjusting the function adjustment wheel [3] to function 4,
5, and 6.
1. Adjust the function adjust-
ment wheel [3] to function 4,
5, and 6, as shown in Fig. 1.
2. The sewing procedure is the same as steps for straight sewing
[Please refer to chapter 2.12. of this instruction].
2.2.14. Three-needle “Zigzag” sewing
The three-needle “Zigzag”
stitch sewing method is the
same as for straight sewing
except for adjusting the
function adjustment wheel
[3] to function 8.
1. Adjust the function adjustment wheel [3] to function 8, as shown
in Fig. 1.
2. The sewing procedure is the same as steps for straight sewing
[Please refer to chapter 2.12. of this instruction].
2.2.15. Blind sewing
The blind stitch sewing method is the same as for straight sewing except
for adjusting the function adjustment wheel [3] to function 9 and 10.
1. Adjust the function adjustment wheel [3] to function 9 and 10, as
shown in Fig. 1.
2. The sewing procedure
is the same as steps for
straight sewing [Please
refer to chapter 2.12. of
this instruction].
2.2.16. Button Hole sewing
Button hole sewing requires the button hole presser foot [38].
1. Change the button hole presser foot [38] according to the
instructions described on 2.5.
EN
sewing machine
Maq-Costura-KSM2612-Manual-2.indd 17 18/02/19 18:34