To Next PageTo Next PageWhat does error F3E mean on my Kuppersberg ECS 403 Hob?
Error F3E indicates a coil temperature sensor failure. The cooking zone indicator will show 'E'. Replace the coil sensor to resolve this issue.
Why does my Kuppersberg ECS 403 Hob display 'H'?
The 'H' displayed on your Kuppersberg Hob is a normal high-temperature notification. It indicates that the hob surface is still hot. This notification will disappear automatically once the temperature decreases.
What does it mean when my Kuppersberg ECS 403 Hob displays 'E7'?
The 'E7' error means that the glass surface of the appliance is too hot. You should stop using the appliance and allow it to cool down.
Why does my Kuppersberg Hob show error F1E?
Error F1E means that the connection between the display board and the left mainboard has failed. The cooking zone indicator will show 'E'. Possible solutions include: 1. Ensuring the connection cable is correctly plugged in or replacing it if defective. 2. Replacing the Mainboard.
What to do if my Kuppersberg ECS 403 Hob shows error ER03?
Error ER03 indicates that water or a pot is covering the user interface. Clean the user interface to resolve this issue.
What does error E2 E mean on my Kuppersberg Hob and what should I do?
Error E2 E indicates that the temperature sensor of the IGBT is high. Please restart the Kuppersberg induction hob after it cools down.
What does error E1E mean on my Kuppersberg ECS 403 and how can I fix it?
Error E1E means the temperature sensor of the ceramic glass plate is high. Please restart the Kuppersberg induction hob after it cools down.
What does error E4 E mean on my Kuppersberg ECS 403 and how to fix it?
Error E4 E indicates an abnormal supply voltage that is too low. Inspect whether the power supply is normal.
What to do if my Kuppersberg Hob shows error E3 E?
Error E3 E indicates an abnormal supply voltage that is too high. Inspect whether the power supply is normal, and power on after the power supply is normal.
What to do if Kuppersberg Hob displays 'H'?
The 'H' notice indicates a normal high temperature. It will disappear automatically once the temperature decreases.
General| Number of Cooking Zones | 4 |
|---|---|
| Control Type | Touch Control |
| Surface Material | Glass Ceramic |
| Power Levels | 9 |
| Width | 590 mm |
| Depth | 520 mm |
| Timer | Yes |
| Safety Features | Child Lock, Overheat Protection |
| Installation Type | Built-in |
Keep children under 8 away from the appliance unless supervised.
Appliance and accessible parts get hot during use; avoid touching.
If surface is cracked, switch off to avoid electric shock.
Danger of fire: Do not place items on cooking surfaces.
Cooking process must be supervised, even for short durations.
Unattended cooking with fat/oil is dangerous and may cause fire.
Damaged supply cords must be replaced by manufacturer or qualified personnel.
Do not use water for fires; switch off and cover flames.
Use only manufacturer-approved hob guards; others can cause accidents.
Overview of models ECS 403, ECO 411, and ECS 630 with technical data.
Overview of models ECS 627, ICS 607, ICS 617, and ICS 627 with technical data.
Overview of models ICS 644, ICS 645 F, ICD 601, ICS 804, ICS 905, ICD 901, ICI 622 W.
Key to decrease power level or timer setting.
Monitors cooking zone temperature, shutting off if it exceeds a safe level.
Device automatically switches off if forgotten, with default working times.
The timer can be set for up to 99 minutes to turn off a zone.
Use '+' or '-' buttons to set time from 1 to 99 minutes.
Always switch off electricity supply before maintenance.
If the hob surface is cracked, disconnect power to avoid electric shock.
Troubleshooting codes and solutions for ceramic hobs.
Troubleshooting codes and solutions for induction hobs.
Cut work surface according to shown dimensions, ensure 5cm space around.
Isolating switch must be approved, provide 3mm gap separation.
Installation must be done by qualified personnel only.
Verify domestic wiring suitability with an electrician; alterations by qualified personnel only.
