Why is my Kuppersberg TG 699 flame dying down right after ignition?
If the flame dies down immediately after ignition, it might be because the button isn't being held down long enough, or the burner lines may be blocked. Try holding down the button for a few seconds after the flames appear.
How to fix a Kuppersberg Hob when the lighter doesn't work?
If the lighter isn't working, it could be due to wet burner parts, an incorrectly fitted burner cover, or a stained ignition plug. Try drying the burner parts, fitting the burner cover correctly, and cleaning the ignition plug.
Why Kuppersberg Hob flame does not spread equally?
An uneven flame spread could be caused by wet burner parts, an incorrectly fitted burner cover, or blocked burner lines. Ensure the burner parts are dry, the burner cover is correctly fitted, and the burner lines are clean.
What to do if gas does not appear on my Kuppersberg TG 699?
If no gas is appearing, the valve may be off, or the gas in the tube may have run out. Turn on the valves and change the gas tube.
What to do if electrical parts of my Kuppersberg TG 699 do not work?
If the electrical parts aren't working, a fuse may have blown. Check the fuse box in your home.
Why flame does not spread equally on my Kuppersberg Hob?
If the flame on your Kuppersberg Hob isn't spreading equally, it might be due to several reasons: the burner parts may be wet, the burner cover may not be fitted correctly, or the burner lines may be blocked. To resolve this: * Dry the burner parts thoroughly. * Ensure the burner cover is correctly fitted. * Clean the burner lines to remove any blockages.
How to fix the lighter on my Kuppersberg TG 699?
If the lighter on your Kuppersberg Hob isn't working, several factors could be the cause: the burner parts may be wet, the burner cover may not be correctly fitted, or the ignition plug may be stained. Here’s how to troubleshoot: 1. Dry the burner parts completely. 2. Ensure the burner cover is properly fitted. 3. Clean the ignition plug thoroughly.
What to do if flame dies down at first ignition on Kuppersberg Hob?
If the flame dies down immediately after ignition on your Kuppersberg Hob, it could be because the button isn't being held down long enough or the burner lines are blocked. Make sure to hold down the button for a few seconds after the flames appear. This allows the gas to stabilize. If the problem persists, the burner lines may be blocked.
Why gas does not appear on my Kuppersberg TG 699?
If gas isn't appearing on your Kuppersberg Hob, it might be due to a closed valve or an empty gas tube. Ensure the valves are turned on. If that's not the issue, try changing the gas tube.
General| Type | Gas Hob |
|---|---|
| Number of Burners | 4 |
| Width | 60 cm |
| Ignition | Automatic |
| Material | Stainless Steel |
| Control type | Rotary |
| Location of controls | Front |
| Gas control | Yes |
| WOK burner | Yes |
| Grill grates material | Cast Iron |
| Color | Black |
| Gas type | Natural gas |
To Next Page
