CUSTOMER SERVICE
877.370.3604 (toll free)
INSTALLATION QUESTIONS
techsupport@kuryakyn.com
or call 715.247.2983
LIMITED WARRANTY
Küryakyn warrants that any Küryakyn products sold
hereunder, shall be free of defects in materials and
workmanship for a period of one (1) year from the
date of purchase by the consumer excepting the fol-
lowing provisions:
• Küryakyn shall have no obligation in the event
the customer is unable to provide a receipt showing
the date the customer purchased the product(s).
• The product must be properly installed,
maintained and operated under normal conditions.
• Küryakyn makes no warranty, expressed or
implied, with respect to any gold plated products.
• Küryakyn shall not be liable for any consequential
and incidental damages, including labor and
paint, resulting from failure of a Küryakyn product,
failure to deliver, delay in delivery, delivery in noncon-
forming condition, or for any breech of contract or
duty between Küryakyn and a customer.
• Küryakyn products are often intended for use
in specic applications. Küryakyn makes no
warranty if a Küryakyn product is used in
applications other than intended.
• Küryakyn electrical products are warranted for one
(1) year from the date of purchase by the consumer.
Components of Küryakyn products containing L.E.D.s
will be warranted for defects in materials and
workmanship for 3 years from the date of purchase.
• Küryakyn makes no warranty of any kind in regard
to other manufacturer’s products distributed by
Küryakyn. Küryakyn will pass on all warranties made
by the manufacturer and where possible, will expedite
the claim on behalf of the customer,
but ultimately, responsibility for disposition of the
warranty claim lies with the manufacturer.
ABOUT OUR CATALOG
For purchasing Küryakyn products, you
can receive a complete catalog free of charge.
Send the Proof-of-Purchase below with
your address to: Küryakyn, P.O. Box 339,
Somerset, WI 54025. Please indicate either
Accessories Catalog for Harley-Davidson
®
or GL & Metric Cruisers.
Be sure to ask your local dealer about other
Küryakyn products, the motorcycle parts and
accessories designed for riders by riders.
©2005 Küryakyn USA All Rights reserved.
I N S TA L L AT I O N
PR O O F - O F - PU R C H A S E
500204 1 Pro Hypercharger Assembly
5 Screws in Plastic Bag Including The Following 2 Items:
3 to Secure Hyper Front to Back
2 to be used in Pro R End Caps
400542 1 K&N Hyper Filter Round
409411 1 Throttle Body Adapter
909411H 1 Hardware Kit Including the Following:
3 1/4”-20 x 1/2” SHCS Alloy W/Patch
4 M5 x .80 x 16mm Hex Flange Screw
2 10-24 x .4 18-8 BSCS
1 14” Long 5/32” Rubber Hose
1 Gasket with Adhesive
1 Nipple, 1/8” NTP EFI Chrome
1 Elbow, 1/4” NTP 90 Degree Chrome
1 Cap Grey Vinyl
1 1” Pin
309411 1 Installation Instructions
Please read and understand entire instructions before starting installation.
ATTENTION! It is the installer’s responsibility to ensure all fasteners (including pre-assembled)
are tightened before operation of the motorcycle. Kuryakyn will not warranty
components lost due to improper installation. Periodic maintenance may be
required.
Some of our high performance air cleaners extend beyond the stock/OEM unit
to achieve smoother airflow and better performance. Riding position may be
affected.
The addition of this air cleaner may change the fuel requirements of the engine.
For best drivability and performance we recommend the use of a “Techlusion”
TFI control box. (Sold separately, P/N 9218.)
Remove the seat and the rear mounting bolt of the fuel tank.
Either prop the rear of the tank up, or have an
assistant hold the rear of the tank up. (See PIC.1.) Remove
the four Phillips head screws form the “air horn” assembly in
the stock air cleaner backing plate. Gently “tug” outward at
the bottom of the stock air cleaner back and it will become
free from the bike, only to be connected by hoses and a wire
harness. Remove the three hoses from the backing plate as
well as the plug from the air mass (temp) sensor.
9411-14MC-0507
To Next Page
Need help?
General
