Kuryakyn PRISM+ PRO KIT WITH CONTROLLER User Manual

PAGE 1
302803
DPF-MRK-003 REV D 7/24/19
PRISM+ PRO KIT WITH CONTROLLER 2803
866 277 9598 | INFO@KURYAKYN.COM
454 COUNTY ROAD VV SOMERSET, WI 54025
KURYAKYN.COM
INSTALLATION INSTRUCTIONS
THANK YOU FOR CHOOSING KURYAKYN!
Protect yourself and others from possible injury and property damage or loss. Pay close attention to all instructions, warnings, cautions, and notices regarding the
installation, use, and care of this product.
THIS INDICATION ALERTS YOU TO THE FACT THAT IGNORING THE CONTENTS DESCRIBED HEREIN CAN RESULT IN POTENTIAL DEATH OR SERIOUS INJURY.
THIS INDICATION ALERTS YOU TO THE FACT THAT IGNORING THE CONTENTS DESCRIBED HEREIN CAN RESULT IN MINOR OR MODERATE POTENTIAL INJURY.
THIS INDICATION ALERTS YOU TO THE FACT THAT IGNORING THE CONTENTS DESCRIBED HEREIN MAY NEGATIVELY AFFECT PRODUCT PERFORMANCE AND
FUNCTIONALITY OR DAMAGE THE PRODUCT ITSELF OR THE PRODUCT TO WHICH IT IS BEING ATTACHED.
ENSURE THAT THE FOLLOWING PARTS HAVE BEEN INCLUDED IN THE KIT:
1 Bluetooth Controller 1 Hardware Kit, containing:
10 Light Pod 12 Alcohol Pad
2 8” Flex-Strip 1 Dielectric Grease
2 4” Flex-Strip 16 4” Cable Tie
8 9” Extension Cords 5 Adhesive Pads
2 12” Extension Cords 1 Adhesive 4” Strip
2 24” Extension Cords 1 Adhesive 8” Strip
2 Y-Connectors - Short 3 T-Tap Connector
2 Y-Connectors - Long 3 Spade Connector
4 Loop Connectors
YOU WILL ALSO NEED:
Phillips screw driver, wire crimper, electrical tape, masking tape, clean rag and warm soapy water
THESE INSTALLATION INSTRUCTIONS CONTAIN IMPORTANT INFORMATION. ENSURE THE END USER RECEIVES THIS COPY
AND IS AWARE OF ITS IMPORTANCE FOR FUTURE USE.
REFER TO THE LAST PAGE OF THE INSTALLATION INSTRUCTIONS FOR L.E.D. COUNTS FOR EACH VARIATION OF PRISM+
LIGHTS. BLUETOOTH CONTROLLERS HAVE A MAX CAPACITY OF 250 L.E.D.S CONNECTED TO IT AT A TIME. MAX CAPACITY
PER CHANNEL IS 100 L.E.D.S, BUT THE CONTROLLER SHOULD NEVER EXCEED A TOTAL OF 250 L.E.D.S CONNECTED TO IT.
STEP 1
Read and understand all steps in the instructions before
starting the installation. Park the motorcycle on a hard, level
surface and turn o󰀨 the ignition. Let motorcycle cool.
BLUETOOTH
CONTROLLER
PIC 1
SPADE
CONNECTORS
T-TAP
CONNECTORS
LOOP
CONNECTORS
Y-CONNECTORS
SHORT
Y-CONNECTORS
LONG
9” EXTENSION CORDS
LIGHT PODS
4” FLEX-STRIP
8” FLEX-STRIP
24” EXTENSION CORDS 12” EXTENSION CORDS
DOWNLOAD APP TO PHONE: KURYAKYN PRISM+

Kuryakyn PRISM+ PRO KIT WITH CONTROLLER Specifications

General

Type	LED Lighting Kit
LED Color Options	Multiple Colors
Power Source	12V DC
Waterproof Rating	IP67
Compatibility	Motorcycles
Features	Multi-color
Control Method	Mobile App
Product Type	LED Accent Lighting
Controller Type	Bluetooth
Installation	Adhesive Mounting
Included Components	LED Strips, Controller, Wiring Harness, Mounting Hardware

Summary

Prism+ Pro Kit Installation Guide

Kit Parts and Tools Required

Lists all components included in the kit and necessary tools for installation.

Safety and Initial Preparation

Covers important safety warnings and initial steps before beginning the installation.

Installing the Prism+ Pro Kit Components

Prepare Installation Areas

Details cleaning and prepping motorcycle surfaces for light adhesion.

Determine Light Placement

Guides on selecting and test-fitting locations for the lights on the motorcycle.

Mount and Connect Bluetooth Controller

Instructions for locating, connecting the controller to the battery, and pairing.

Advanced Wiring and Functionality

Disconnect and Position Controller

Covers disconnecting lights after testing and setting the controller's position.

Optional Brake-Rear Turn Signal Setup

Explains how to set up or bypass brake-rear turn signal functionality.

Connect Extension Cords and Pigtails

Guides on connecting extension cords to the controller and pigtails to T-Taps.

Finalizing Light Installation

Adhere Lights and Connect Cords

Details adhering lights to the bike and connecting them to extension cords.

Connect Loop Connectors

Guides on connecting loop connectors to the end of light branches per channel.

Secure Wiring and Reassemble

Covers securing all wiring and reinstalling any removed motorcycle parts.

Warranty and Compliance Information

Limited Warranty Details

Outlines Kuryakyn's limited warranty terms, conditions, and exclusions.

Return Policy Guidelines

Provides information on the policy for returning defective or non-defective merchandise.

FCC Warning Statement

Details FCC compliance, potential interference, and user guidance for radio frequency energy.

LED Count and Connection Examples

LED Count Table

Lists LED counts for various Prism+ light components and controller capacity.

Creating Light Chains

Provides examples and guidelines for creating light chains with different components.

Using Y-Connectors

Explains proper usage of Y-connectors for connecting lights and managing LED counts.