EasyManuals Logo

Kurzweil Artis Getting Started Guide

Kurzweil Artis
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
Reading this guide with the Artis7
GS-2
GETTING STARTED GUIDE
Reading this guide with the Artis7
This Getting Started Guide is designed to cover both the Artis and Artis7 Stage Pianos. Both
instruments share common features and the term “Artis” is used to cover a description of
both instruments. Where there are differences, we use the name “Artis7” to help instruct
owners of that instrument.
Before You Start…
Dont connect anything until you make sure the Artis is properly and safely situated. If your
Artis keyboard has been out in the cold, give it time to warm up to room temperature before
starting it, since condensation may have formed inside.
Setting up the Artis
1. Set the keyboard on a hard, at, level surface.
2. Four adhesive-backed rubber feet are provided with Artis. Carefully turn the keyboard
over onto a soft surface, remove the paper backing from the rubber feet and attach them.
NOTE : Unless the instrument will always be used with a keyboard stand,
attachment of the rubber feet is strongly advised. Otherwise protruding
screws will scratch the tabletop.
3. Connect the AC power cord to the Artis. Before plugging the cable into the power outlet,
check that the power is compatible with the Artis. The Artis runs on AC power and works
with voltages from 90-240 volts at 50–60 Hz (Artis7 is 100-240 volts at 50–60 Hz). The
voltage level is detected and set automatically by the Artis. If your power source does not
have the standard three hole outlet, you should take the time to install a proper grounding
system. This will reduce the risk of a shock. If your power outlet is not within these ranges
it is recommended you use an appropriate adaptor.
4. Plug the power cable into the wall.

Other manuals for Kurzweil Artis

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kurzweil Artis and is the answer not in the manual?

Kurzweil Artis Specifications

General IconGeneral
Sound effectsChorus
Output impedance400 Ω
Maximum polyphony (notes)128
Number of transpose switches2
Number of front panel sliders9
Keyboard nameFatar TP100
Keys quantity88 keys
Headphone outputs1
Product colorBlack
Display resolution240 x 64 pixels
AC input voltage90-256 V
AC input frequency50 - 60 Hz
Power consumption (max)10 W
General MIDINo
FX units quantity16
Effect chains quantity1000
User programs quantity256
Number of relative volume zones4
Cables includedAC, USB
Weight and Dimensions IconWeight and Dimensions
Depth395 mm
Width1385 mm
Height140 mm
Weight21000 g

Related product manuals