Forte SE Sounds
Controllers
14
GETTING STARTED GUIDE
To select another Program or Multi within the same Category, just press a Program/Multi
Button, or use the Alpha Wheel, or Next/Previous Buttons.
To select a Program or Multi in another Category but not in the other Bank (Factory/User),
press the desired Category Button, followed by the desired Program/Multi Button. e Alpha
Wheel and Next/Previous Buttons will select the next Category once you get to the end of
the current Category. Pressing the Category Button will select the Default Program for that
Category. e Default Category Program can be set by the user for each Category. By default
the Forte SE has the Default Program for each Category set to the rst Program of each
Category. To change the Default Category Program please refer to the User Manual.
Controllers
e Sliders, Wheels, Pedals and Buttons can control each of the factory Programs and Multis,
to produce variations to the sound. Don’t forget to try these out as you explore the factory
sounds on the Forte SE.
Favorites
e Forte SE also features Favorites Buttons to quickly recall your favorite sounds. e
Favorites buttons store a set of 10 Programs and/or Multis. To assign the currently selected
Program or Multi to a Favorites button, press and hold the desired Favorites button for a
few seconds until the display indicates that the favorite has been saved. To recall a favorite
Program or Multi, simply press the one of the Favorites buttons. e Favorites buttons will
work from whichever mode you are currently in, changing to Program Mode or Multi Mode
automatically if required.
To Next Page
Loading...
