T
Terry HunterSep 8, 2025
What to do if the wall outlet voltage is below 90 volts due to overload for Kurzweil Forte Musical Instrument?
- MMonique HancockSep 8, 2025
Try using a different outlet that's on a different circuit.
To Next PageTo Next PageWhat to do if the wall outlet voltage is below 90 volts due to overload for Kurzweil Forte Musical Instrument?
Try using a different outlet that's on a different circuit.
What to do if the volume slider is turned down on Kurzweil Musical Instrument?
If the volume slider is down, slowly push the volume slider up.
What to do if the power cable is not plugged securely into the wall outlet for Kurzweil Forte?
Ensure the power cable is fully and securely plugged into the wall outlet.
What to do if the volume control on the audio system or mixer is turned down for Kurzweil Forte Musical Instrument?
If the volume control on your audio system or mixer is too low, slowly turn the volume control up.
What to do if the MIDI cable is not securely plugged in at both ends of Kurzweil Forte Musical Instrument?
Make sure to securely plug in the MIDI cable at both ends.
What to do if the wall outlet, power strip, or extension cord is defective or damaged for Kurzweil Musical Instrument?
If you suspect the wall outlet, power strip, or extension cord is defective, try using a different one.
What to do if the MIDI transmit channel of the transmitting device does not match that of the receiving Program or Zone on the Kurzweil Musical Instrument?
Change the channel on either the Forte or on the computer so that the channels match.
What to do if the input trim to the audio system or mixer is set too low for Kurzweil Forte Musical Instrument?
Slowly turn up the trim.
What to do if the pedal is acting backwards ('on' when up instead of down) on Kurzweil Musical Instrument?
Power cycle the unit making sure to NOT press on the pedal during startup.
What to do if Sustain or Sostenuto is stuck 'on' on Kurzweil Musical Instrument?
Make sure the pedal is plugged in before turning on the power. If necessary, turn the power off, and then on again.
General| Pitch wheel | Yes |
|---|---|
| Sound effects | Chorus, Compression, Phaser |
| Output impedance | 50 Ω |
| Built-in speaker(s) | - |
| Maximum polyphony (notes) | 128 |
| Number of transpose switches | 2 |
| Number of front panel sliders | 9 |
| Audio (L/R) out | 4 |
| Headphone outputs | 1 |
| Keyboard name | Fatar TP/40L |
| Keys quantity | 88 keys |
| Product color | Black |
| Display resolution | 480 x 272 pixels |
| General MIDI | No |
| FX units quantity | 32 |
| Effect chains quantity | 1000 |
| User programs quantity | 1024 |
| Factory multis quantity | 186 |
| Factory programs quantity | 322 |
| Cables included | AC, USB |
| AC input voltage | 100-240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (max) | 20 W |
Weight and Dimensions| Depth | 395 mm |
|---|---|
| Width | 1385 mm |
| Height | 140 mm |
| Weight | 21800 g |
