Need help?Do you have a question about the Kurzweil K2000, K2000R and is the answer not in the manual?
General| Type | Synthesizer |
|---|---|
| Model | K2000, K2000R |
| Year Released | 1991 |
| Polyphony | 24 voices |
| Multitimbral | 16 parts |
| Sampling Rate | 44.1 kHz |
| Velocity Sensitivity | Yes |
| Aftertouch | Yes |
| Display | LCD |
| MIDI | In, Out, Thru |
| Synthesis Type | VAST (Variable Architecture Synthesis Technology) |
| Waveforms | Sampled waveforms |
| Filters | Resonant low-pass, high-pass, band-pass, notch |
| LFO | 2 LFOs |
| Effects | Reverb, Chorus, Delay, Distortion |
| Keyboard | 61 keys (K2000) |
| Sequencer | Yes |
| Storage | Floppy disk |
| Audio Outputs | Stereo |
| Audio Inputs | Stereo |
| Weight (K2000) | 35 lbs |
| Dimensions (K2000) | 1041 x 381 x 114 mm (41 x 15 x 4.5 inches) |
Covers essential safety information for installation, operation, and handling to prevent hazards.
Highlights risks associated with grounding, voltage selection, and proper plug usage.
Guide for initial setup, operational checks, and voltage selection.
Instructions for connecting the power cable, including voltage selector checks.
Detailed steps for performing the Calvin test on layers and parameters.
Introduction to the diagnostic software, its structure, and types of tests.
Details and instructions for K2000 diagnostics software version 0.4.
Explains the general structure of the diagnostic software and test types.
Details on how to initiate and interpret scanner diagnostics.
Details and instructions for K2000R diagnostics software version 1.0.
Steps to check basic connections and power before troubleshooting.
Overview and usage of K2000 diagnostic tests.
Detailed guide on using the LED-based scanner diagnostics.
Overview of the diagnostic software for both K2000 and K2000R models.
Guide on how to enter and use the diagnostic software.
Detailed explanation of memory tests, including data and address errors.
Explains the use of scanner diagnostics for front panel controls and buttons.
Instructions for running scanner diagnostics with version 1.4 software.
Procedure for accessing the diagnostic mode on the K2000.
Instructions for performing the Burn-in test on newly shipped units.
To Next Page