Effects Mode and the Effects Editor
Configurations and Parameters
9-17
Parametric EQ, Chorus, Delay, and Mixer
EditEffect|||||<>Config:Para+Cho+Dly+Mix
Frq1:0.10|ChrSrc:EQ|DlyEQSrc:EQ||Dry|:1|
Lvl1:-12d|ChrDly:0m|DlyEQIn|:0|||EQ||:1|
Frq2:0.10|LFOSpd:0||DlyChrIn:0|||DlyR:1|
Lvl2:-12d|LFODep:0||DlyTime|:9ms|DlyL:1|
Frq3:0.48|||||||||||Feedback:0%||ChrR:1|
Lvl3:-8dB||||||||||||||||||||||||ChrL:1|
Name|||Save|||Delete|Dump|||||||||||||||
PARAMETER RANGE OF VALUES
BAND 1 FREQUENCY 0.1 to 12.60 KHz
BAND 1 LEVEL ±12 dB
BAND 2—3 FREQUENCY 0.1 to 12.80 KHz
BAND 2—3 LEVEL ±12 dB
CHORUS EQ SOURCE EQ, Dry
CHORUS DELAY 0 to 60 milliseconds
CHORUS LFO SPEED 0 to 65
CHORUS LFO DEPTH 0 to 99
DELAY EQ SOURCE EQ, Dry
DELAY EQ IN 0 to 10
DELAY CHORUS IN 0 to 10
DELAY TIME 0 to 1500 milliseconds
DELAY FEEDBACK 0 to 99%
DRY LEVEL 0 to 10
EQ LEVEL 0 to 10
DELAY LEVEL RIGHT—LEFT 0 to 10
CHORUS LEVEL RIGHT—LEFT 0 to 10
To Next Page
Loading...
Need help?
General
