Effects Mode and the Effects Editor
Configurations and Parameters
9-19
Chorus, Delay, Room Reverb, and Mixer
EditEffect|||||<>Config:Cho+Dly+Room+Mix
ChrDly:0m|DlyDryIn:0|||RevDryIn:9||CR:0|
LFOSpd:0||DlyChrIn:0|||RevChrIn:0||CL:1|
LFODep:0||DlyTime|:0ms|RevDlyIn:6||DR:1|
||||||||||Feedback:0%||RvPreDly:0||DL:1|
|||||||||||||||||||||||HFrqDamp:WrmRR:1|
DryLvl:0|||||||||||||||Rev|Time:0.1RL:1|
Name|||Save|||Delete|Dump|||||||||||||||
PARAMETER RANGE OF VALUES
CHORUS DELAY 0 to 60 milliseconds
CHORUS LFO SPEED 0 to 65
CHORUS LFO DEPTH 0 to 99
DRY LEVEL 0 to 10
DELAY DRY IN 0 to 10
DELAY CHORUS IN 0 to 10
DELAY TIME 0 to 750 milliseconds
DELAY FEEDBACK 0 to 99%
REVERB DRY IN 0 to 10
REVERB CHORUS IN 0 to 10
REVERB DELAY IN 0 to 10
REVERB PRE-DELAY 0 to 60 milliseconds
HIGH FREQUENCY DAMPING Warm, Soft, Bright
REVERB TIME (DECAY) 100 milliseconds to 1.2 seconds
CHORUS LEVEL RIGHT—LEFT 0 to 10
DELAY LEVEL RIGHT—LEFT 0 to 10
REVERB LEVEL RIGHT—LEFT 0 to 10
To Next Page
Loading...
Need help?
General
