2
K2600 “Best of V.A.S.T.” User’s Guide
Groove Setups
Groove Setups
Setups 1–30 in “Best of V.A.S.T.”are Groove Setups. Once you’ve installed the objects, you can access the setups by
pressing the
Setup
button on the front panel of your K2600.
When you are playing a Groove Setup, you can activate a drum pattern (actually a song file) by pressing any key
below C3 (C below middle C). Once triggered, the drum pattern is automatically held or latched (in other words,
you do not need to keep holding the key down for the groove to continue playing). Most grooves have a bass
sound assigned to the left hand keyboard region, as well as some sounds for right hand playing.
Use your K2600’s large ribbon to activate a fill for the groove. (There is one groove that does not follow this con-
vention, #2, where there is no fill on the ribbon. Instead, a 'toms fill' is activated when you play between C3 and C4
on the keyboard.)
Note:
After pressing
panic
, grooves won't trigger; you must scroll away and then back for the setup to get the cor-
rect entry value.
To Next Page
Loading...
