Kurzweil PC88 - Windows Installation

Chapter 1 Basic Operation
The following is a brief description of the Kurzweil
PC88's Front Panel controls and Rear Panel connections.
This has been prepared for the servicer of the instrument
to give a general idea of basic operation. To examine the
full capabilities of the Kurzweil PC88's functions, consult
the PC88 Musician's Guide.
Rear Panel
The Rear Panel contains the connections for power,
MIDI, audio pedals.
Power 9.5V-AC In MIO! Select MIDI in MID! ThrufOut = MIDI Out
Cc An P eo.
L_s] =! a a a “e |
2.0A
Power
The PC88 uses an external 9.5V, 2.0A ~ AC power
supply. Power is turned on by pressing the rocker switch
into the "on" position (white dot in). Prior to connecting
the power supply, be sure the switch is in the "off"
position (white dot out). .
There is a strain relief mounted on the rear panel so
that the wire from the power supply can be wrapped
around it to prevent damage to the AC jack if the the cord
is yanked. Wrap the wire once, not too tightly, around the
strain relief, before inserting the plug into the socket.
MIDI
There are three MIDI jacks on the rear panel, MIDI In,
MIDI Thru/Out and MIDI Out.
PC88 Service Manual
1-1